View Single Post
Old 12-23-2006, 12:00 PM   #3 (permalink)
MCB Member
HP_Lovecraft's Avatar
Join Date: Aug 2006
Location: Southern Maine

The most common reason I've heard is that .68 was a very common bath bead size.
Most bath beads were made by pharmacuticals, who now make all the paintballs.

SO, they probobly told Nelson that it would be cheapest to use .68 since it would not reqire any new casting dies.

I've also heard that Nelson simply used a 22/32" drill, since it was what they had laying around.

HP_Lovecraft is offline   Reply With Quote