Started with a brand new procarb.
Replaced the barrel, and replaced velocity screw with short screw.
Replaced stock hammer with lightened hammer
Installed stabalizer and x-chamber. Regulated down until gun no-longer recocked, back up a hair to settle at about 600psi.
Installed RVA and used spring kit to acheive 285fps.
I run a 16oz anti-siphon and Empire Reloader.
This gun has achieved +/-0 at the chrono on two seperate occasions, and is always within+/-3 on a big red chrono
The only fault this setup has is that once the co2 cools off, there's not enuff pressure to recock without a ball chambered. As long as there's a ball there it recocks, and the reloader makes sure there is. As long as its on...