View Single Post
Old 07-19-2009, 02:33 PM   #1 (permalink)
Mayvik
Inch of Gold
 
Mayvik's Avatar
 
Join Date: May 2007
Location: Denver

Fan of EMR
CCM Fan
Brass and Wood Fan
PPS Fan
Issue with Splatty kit

So I picked up one of your Splatmaster kits from another member here. Installed fine (with the exception of needing to shave a sliver off the notch in the safety), dry fires fine, however it's extremely difficult to get the 12 gram knob back on. If I manage to crank it in there, it dumps down the barrel unless I cock it, then it dumps out of every orifice. When I fire it before the cartridge is empty, it still goes boom through the leak, but the barrel comes loose from the posts and falls out the front.

Probably not going to be around to answer this, but maybe one of the others who has a kit can give me a clue what I'm doing wrong? I'm guessing something is weird with the valve?
__________________
My Feedback

Last edited by Mayvik; 07-19-2009 at 02:34 PM. Reason: hukd on fonix
Mayvik is offline