Thread Tools Search this Thread
Old 04-20-2012, 08:57 PM   #1 (permalink)
RaYmUnDo123's Avatar
Join Date: Mar 2012

Automag x-valve air leak

Initially My asa was leaking installed a new oring fixed that. Simultaneously i am having a air leak through the barrel.( i read it could be from the asa) It leaks and i shoot it and sometimes it goes away sometimes it does'nt. I have put a good amount of lube in the marker. My question is should i buy an oring kit for the x-valve and try to replace all the orings. I would do that but could it be leaking due to something other than the orings? Any info would help thanks. EDIT I think the sear maybe activating the xvalve causing the leak.

Last edited by RaYmUnDo123; 04-20-2012 at 10:05 PM.
RaYmUnDo123 is offline   Reply With Quote
Old 04-20-2012, 09:01 PM   #2 (permalink)
Closer to home.....
Zondo's Avatar
Join Date: Dec 2008

First, if you don't have a rebuild kit already, buy one.

Next, air up your gun and pull and hold the trigger. Does the leak stop or continue?

My Feedback: Here on MCB BigEvilOnline PaintBallNation
Zondo is offline   Reply With Quote
Old 04-24-2012, 09:53 PM   #3 (permalink)
Post Whore
henchman's Avatar
Join Date: Jan 2010

Take the barrel off.
Remove the x-valve.
Unscrew the brass tip, and remove shims,mifvtherecare any in there.
Replace brass tip.
Air it up.
If it leaks. You need a smaller carrier.
henchman is offline   Reply With Quote
Reply » Paintball » The Armory » Air Gun Designs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump

All times are GMT -4. The time now is 05:55 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC