| ||Thread Tools||Search this Thread|
|09-03-2007, 07:18 PM||#1 (permalink)|
All teh pews
RT pressure problem, help please!
I have a classic RT and heres the deal. When I gas it up it will shoot 2-3 shots fine, then build up pressure and leak out the back. One shot and its fine again. At the chrono its like 275, 278, 360, 275, 279, 367...I'm not sure what I need to replace, help would be greatly appreciated! thanks!
|09-03-2007, 10:03 PM||#2 (permalink)|
Lions, Tigers, and Bears...
Join Date: May 2007
No biggie, just rebuild it.
The Mag Smith | AGD | Air Gun Designs | Automag | Minimag | Custom Mag | Mag Parts
Replace every o ring and washer supplied in the rebuild kit one at a time till its healed.
|09-03-2007, 10:11 PM||#3 (permalink)|
Join Date: Nov 2006
Location: Cold Lake, Alberta, Canada
In a classic valve it would most likely be the regulator seat. Not sure what it looks like or where it is in the RT valve.
My guess is replacing the o-ring here will solve the problem (note the picture was stolen outright from an animation on ZDSPB.com): https://www.mcarterbrown.com/gallery/...php/photo/8495
"Now is no time to be making new enemies" - Voltaire (When asked on his deathbed by a priest to renounce the devil and turn to God.)
Last edited by Surestick; 09-03-2007 at 10:20 PM.
|09-04-2007, 10:09 AM||#5 (permalink)|
Join Date: Aug 2007
Location: North East Pennsylvania
You aren't using CO2 are you?
In case you are, you shouldn't because the RT valve recharges so quickly that it heats up. This heat would cause CO2 to expand and over-pressurize the valve, showing the symptoms that you have described here.
If you aren't using CO2, a rebuild of the reg might be necessary.
You can find parts from the airgun webiste here: Airgun Designs Online Store - X-Valve/Retro/Emag/RT Valve Parts[/INDENT]
|Thread Tools||Search this Thread|