mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 09-19-2017, 08:18 PM   #1 (permalink)
Perfection will suffice
 
Menace's Avatar
 
Join Date: Oct 2008

CCM Mag-Specific Air Fittings Coming Soon

All,

Just wanted to put out the word that CCM is coming out with a limited run of fittings designed just for our beloved valves.

Owing to the relatively shallow depth of the air fitting inlet, AGD threading on the valves runs a little small. Added to this is the fact that CCM builds their fittings to their own markers, which run a slightly larger spec.

Stacked up, these tolerance differences mean that newer CCM fittings typically will only go about two turns into mag valves, which is not ideal for strength, especially given the input pressures we like to run. Probably most folk don't even notice this, but it is something to consider if safety is an issue for you.

Their older fittings had longer posts, which worked well in this application and allowed more turns into the valve, but of course, these are no longer available new.

This limited run will come as a set of two fittings, and will have one normal length post for the ASA and one longer post that goes into the valve.

I believe the set will run $30.

They should theoretically be available now, but the site may not yet reflect that. You can always contact them directly for more information.
__________________
"Dude. I'm pretty sure he's behind one of those bunkers over there."



My Feedback: https://www.mcarterbrown.com/forums/f...-feedback.html

Have you seen That Paintball Channel?
Menace is offline   Reply With Quote
Old 09-28-2017, 02:03 PM   #2 (permalink)
Rec Poster
 
Join Date: Feb 2009
Location: Woodstock, Ont

I might be interested in these, if you find out when they will come out please let us know
__________________
My Feed Back
rob-o is offline   Reply With Quote
Old 09-28-2017, 02:20 PM   #3 (permalink)
Perfection will suffice
 
Menace's Avatar
 
Join Date: Oct 2008

They are already out, and some have already been sold.

I cannot see anything on the website listing them specifically, but if you contact them directly they'll take care of you.

You can also contact CCMachinist here.

All the best!
__________________
"Dude. I'm pretty sure he's behind one of those bunkers over there."



My Feedback: https://www.mcarterbrown.com/forums/f...-feedback.html

Have you seen That Paintball Channel?
Menace is offline   Reply With Quote
Old 09-28-2017, 02:22 PM   #4 (permalink)
mag shooter
 
superman's Avatar
 
Join Date: Jun 2007
Location: Charleston, SC

I believe i was the first to purchase and mine came in last week.
__________________
I buy Automags and Parts: if you need cash shoot me a pm

My shop page: Bearded Works

feedback(https://www.mcarterbrown.com/forums/f...-feedback.html)
superman is offline   Reply With Quote
Old 09-28-2017, 03:42 PM   #5 (permalink)
Perfection will suffice
 
Menace's Avatar
 
Join Date: Oct 2008

Is there a link you used, or did you contact them directly?
__________________
"Dude. I'm pretty sure he's behind one of those bunkers over there."



My Feedback: https://www.mcarterbrown.com/forums/f...-feedback.html

Have you seen That Paintball Channel?
Menace is offline   Reply With Quote
Old 09-29-2017, 02:08 PM   #6 (permalink)
Rec Poster
 
Join Date: Feb 2009
Location: Woodstock, Ont

I pmed CCMachinist and was told to email shopkeeper@chipleymachine.com
__________________
My Feed Back
rob-o is offline   Reply With Quote
Old 09-29-2017, 05:37 PM   #7 (permalink)
Perfection will suffice
 
Menace's Avatar
 
Join Date: Oct 2008

Well, there you go.

Enjoy!
__________________
"Dude. I'm pretty sure he's behind one of those bunkers over there."



My Feedback: https://www.mcarterbrown.com/forums/f...-feedback.html

Have you seen That Paintball Channel?
Menace is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Air Gun Designs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:18 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC