| ||Thread Tools||Search this Thread|
|10-10-2017, 12:08 AM||#21 (permalink)|
Join Date: Feb 2012
Location: Fredericksburg, VA
This one. I'm not sure about the e-mag on/off, but the ULT won't work inside a classic valve.
|10-10-2017, 08:27 AM||#23 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
For sure, stick with the classic or RT on/off.
The emag on/off will work, but the o-ring is not as durable with little to no payback in a classic.
The ULT...physically fits in the classic valve, but getting it to work reliably requires a lot of extra effort and tooling. The lower top pressure of the classic valve doesn't push the ULT open well enough to keep it from hanging up.
They all operate the same in theory, with subtle differences in trigger feedback.
Actually, in an emag, the on/off doesn't need to operate perfectly when bouncing or in electronic mode. It just needs to keep the pressure low until the bolt can return, which is fast in those two modes. Sorry, mind wandering again.
some things are stickier than others
Last edited by Spider!; 10-10-2017 at 09:27 AM.
|10-19-2017, 05:48 AM||#27 (permalink)|
Join Date: Feb 2014
which one do you have?
|Thread Tools||Search this Thread|