| ||Thread Tools||Search this Thread|
|10-30-2017, 09:48 AM||#1 (permalink)|
Where's Tug Contest Winner
Join Date: Aug 2012
Location: Redneckville ok
Splash minimag value.
First off i am not a mag guy. Have tried to fix 2 and no luck. Both are long gone.
So i got this one and am curious roughly what this would go for.
Assume it wont be working.
What i know: its blue and leaked like crazy before i ran out air.
Was told it has a level 10.
does the mismatch blue affect the value much.
.....................WTB your pball MANUALS......................
Is it not to divide your bread with the hungry and bring the homeless poor into your house. Isaiah 58
|11-07-2017, 05:44 AM||#3 (permalink)|
Join Date: Jul 2007
Location: louisville ky --502---
Deff part that frame out to a person with the kit u will get a better price for the part anyways ...still should get 300 350 with a stock frame if ya wait for the buyer lokks like the extra asa matches the off frame too 25 for the asa and bet u coukd get 100 if ya mean for the frame alone
|11-07-2017, 11:20 AM||#4 (permalink)|
Join Date: Feb 2012
Location: Fredericksburg, VA
If the valve needs a rebuild kit, you're not going to get much for it. Used working valves sell for about $40-50, and rebuilt kits are about $20, so you might only get $30 for the valve.
If it has Level 10, that's a $50-$80 bump in value (depending on whether you have any spare parts with it). To confirm that it has a Level 10, you need to take off the valve and then take off the bolt. Inside the bolt at the end of the power tube, there is a threaded brass cap. If the cap has a slot for a flathead screwdriver, then it's a Level 7 bolt. If the brass cap has a hex head, then it's a Level 10 bolt.
|Thread Tools||Search this Thread|