Goblin Deuce Autococker threading
Is anyone able to do this? It should be the same as threading any body with 'cocker threads, but I wasn't able to find anything when I search. There's enough material, Goblin even stated that its possible to thread the ends.
I'm just wondering if its possible (should be, don't know why not)
and How much?
this is why
Here's my idea:
"Illustration" showing threading
Couldn't see why you would want. Unless you wanted to make a double barreled sawed off. But even then since a goblin's fps is set by it's cartage's charge. Won't that effect it threw say a 12" barrel. So if it has no velocity adjustment. I would say doing the mod would have no meaning if it wont get over 200fps
The new goblin deuces should work a bit better. I believe. I'm just curious if someone can do this. Barrels would be 8" at most.
I'll test the deuce when I get it and decide then, but for now I just want to know How much
If it's using the exact same valving system, which it is, why on earth would it work any better than the solos?
I'm planning on just getting an extra set or two of o-rings and using HPA, you get a better velocity out of it.
Don't ask why, just tell me how much. :D
You get worse velocity using HPA because there is no liquid to expand, like CO2
However i would also be interested in threading a goblin Deuce, because due to the length of hte barrel/ catridge of the Solo (less so on hte Duece because of increased length) the ball does not have enough space to reach maximum velocity...
People experimented using freak inserts instead of the cartridge casings and only got positive results.. however i think the area that allowed a freak insert to be used was filled in...
If that makes any sense ;)
"Higher velocities in the 280-300 FPS range have been recorded, using compressed air, although this can cause faster wear of the O-Rings. It is therefore recommended that GOBLIN Air Cartridges be filled with CO2 whenever possible, especially when lower velocities are desirable or necessary."
and for threading:
"-Solid Barrel 'ends' can be tapped for Barrel Extensions"
and velocity issues:
"Longer Barrels dramatically increase the performance potential of the Air Cartridges"
All of that is from Goblin
Really they said HPA was better? i thought they said atfirst CO2 was better, not to worry...
Theybrecommend CO2 since it doesn't wear out the o-rings as fast as when you use HPA.
|All times are GMT -4. The time now is 12:47 PM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC