-   AKA (
-   -   Evil M, how to get one (

Tbaggin 04-13-2012 03:03 PM

Evil M, how to get one
So how does one acquire an Evil M?

Whee McGee 04-13-2012 03:40 PM

You must purchase one from someone who has built one, or build one yourself. There is an enourmously informational thread in the AKA subforums of PBNation, with tips on where to get the bodies, where to get milling done, where to pick up the parts required, and dozens of pictures and opinions on how to put it all together.

Best of luck to you on your quest. It's a difficult and expensive project, from what I've seen, but they can yield some truly beautiful results!

MorueM 04-13-2012 06:27 PM

Thread is in PBN's Custom Markers section, not AKA section, and is titled "Stacked Tube Viking".

And money is the best way to acquire an EvilM..

skinnyfatguy 04-13-2012 06:30 PM

Here is the thread on PBN: Stacked Tube Viking

Destructive Customs is selling raw bodies, lprs, & cartridges: Destructive Customs | Evil M

[shameless plug]I may be selling a complete one shortly when I get my other two back from ATMF and up and running[/shameless plug]

Tbaggin 04-14-2012 12:03 AM

Thanks for the links. I really want to build one of these. Time to read up.

dark_controller 04-14-2012 12:14 AM

if you end up building one, please make a thread covering it.

xero28 04-14-2012 04:45 AM

A few guys on PBL (myself included) have built some Ehms. I know most of them are here as well and over on PBN. Here's my build thread. I did all of the shaping for the body myself. Giving my Evil-M a hand job... - PB Legion I absolutely LOVE this gun. It's light, fast, and just WORKS. I mean, it's essentially an AKA gun, so there is practically zero maintenance. I've owned probably over 25 guns in that's 5 years or so after getting back into the game, and this one is never leaving my hands.

And here's a thread with a bunch of completed Ehms.

Tbaggin 04-14-2012 03:36 PM

where could I get milling specs, as far has how thin to go or not to go and where and such. not looking to copy, but i may have mill access and i dont want to ruin a body

diesel_fireman2001 04-15-2012 11:20 PM

Go to the page on the PBnation link, on the first post there is a link to a .zip file with CAD drawing of the Evil M bodies.

MorueM 04-15-2012 11:29 PM

They are not exact from what I saw...

All times are GMT -4. The time now is 06:16 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC