- dye rotor (og) floor tray wont sit right and moves around
- Dm3/4/5 solenoid gasket
- Eye Pipe on DYE NT10
- DM7 LPR Small Oring
- DM4: My first spool
- Need a new breech.
- Oil Slick DM7
- DM6 LPR Set Screws
- 13 Proto Reflex rear trigger screw comes loose
- DM3/LCD Operating pressures
- New old Anderson board and new old Wrath board
- Proto/Dye Matrix Frame Magnet Mod
- DM11 FSDO problem
- 2011 pmr help
- Wanted: Proto PM7 circuit board or alternitive
- Size/spec of 3 pin micro connector for DM7+ eyes?
- Orange bolt separated?
- Looking for leads... Virtue Speedy 2 NYX Board
- Proto Rize Maxx
- Help me "thought" this out. DM9
- WTB PM7 LPR Assembly
- DM5 solinoid leaking.
- DM7 air transfer set screws
- DAM Leak as Velocity Goes Up
- Does Dye ever call you back?
- Proto SLG wont stop leaking
- They have coloured primos now.
- Does Proto stuff go here to....I got a new project...
- DYE Dam Handguard Options
- Identifying a DYE Electro
- Right/Warp feed DM3 breech
- Pouch or Faz/Fast mag for coupled 20 round DAM Magazine?
- Breach paintball breaks using magazines
- How to put a DM6-9 VP trigger into an SLG UL
- E-Matrix Eggi Eye plug end?
- PMR issue
- 2006 rail leaking
- What am I supposed to do with this?
- interchangable parts between the DMs?
- DMC (DM5) Troubleshooting
- DJ Matt's ultimate Dye DAM mods and tricks....
- Dam barrel wiggle
- Need Help with Dye Dm3
- Gen-E lcd board micro switch mod
- Dye ultralight cocker or superbolt?
- How to remove a beer can and front wall that get stuck in the breech
- Confused on Proto/Dye
- Dm14 trigger idea
- What bolt have I got? DM4
- New to 03 and earlier Matrix guns.
- not sure what its worth?
- What board for an OTB vert frame?
- 2012 vs. 2013 Reflex Rail?
- Looking to join the Dye realm!
- Dye DM12 Consistency
- Help Identifying parts on a Gen-E Matrix
- UL drop forward
- I've been a member for some time thought maybe I should share a little
- What is it and value?
- Proto Matrix Rail 07 questions
- Dye Hinge Trigger Internals
- How can I run my dam and havok off of one tank?
- PMR 2011 tophat mod
- DM4 Newb here!
- 08 PMR leak in the breach
- Help with DM6
- DAM magwell logos
- Older PMR macro line
- Dye DAM Efficiency numbers
- dye dam airhole
- Day dam is it worth it
- Seeking some CAD work from someone who has access to a DAM
- What is the deal with the DM14?
- dye proto martrix 5
- Need help gluing a piece on my SLG
- PMR11 Reg Will Not Tighten
- PM5 leak
- Dm4/5/C solenoid spool o-rings...
- 07 PMR solenoid venting.
- DYE DAM air thru stock
- please help me =[ . pm6 virtue board eyes.
- NEW! Dye Assault Pistol!
- DYE DAM leaking
- DM 4 Triggers
- DM4
- DM3 Breech
- Dye Autococker
- Small leak down the barrel after first shot
- Need Help Finding DM3 Eye Breach and Carrier!
- DAM Magwell
- DM3 Help
- Leak from on/off switch on DM5
- D.A.M. upgrades, rumors, design ideas, etc
- Pm7 problems
- Dye dam air in stock mod
- Ultralite grips new vs old?
- DAM - Breach breaks with Halo?
- proto pmr7 solenoid problems
- Ironmen DM6's
- dam name plates
- DM7 trigger wont fit
- DYE DAM - Cold weather, terrible paint
- Why was the SLG discontinued?
- dye matrix/dm3 board?
- DAM electro pump?
- Evolve 90* frame trigger dimensions
- Dye ASA question
- Lockout matrix need appraisal
- Dye assault matrix DAM reviews?
- DAM Packaging
- DM6.. worth trading for?
- What is a basic proto slg worth?
- UL board question
- Gen E buzz when firing.
- DM12 Nexus
- DMC replace pad
- Dye Barrels
- Proto PM8 leak
- What is it worth?
- Dye Carbon Fibuur Boomstick?
- Dm12 experience ?
- Proto Matrix Rail maintenance?
- Best way to repair reg seat threads?
- dye 45 or single hinge
- looking for new hopper electronic
- PMR 07 will not fire
- SLG not chronoing consistently
- MCB's favorite DYE marker?
- Hyper 3 problem.
- PMR 07/08 Help!
- PM5 and DM5 Ultralite Frame Compatibility
- PM8 - intermittent leak at solenoid
- PM7 eye covers compatible with PMR?
- PMR ASA out of spec?
- Dye mirror lens.
- New to DYE UL Barrels
- Wanted: White/Gold Dye i4's
- DM5ed Angel Speed
- UL Price Check
- proto slg issues
- Windowed DM12
- Need help with my DM4. Mods?
- 9 years in the making
- Xmas was early this year :)
- DM6 questions
- 1st spacegun = DM9
- just bought a DM3...What have i gotten myself into?
- Help with my Musashi 5 board.
- Will a Proto Matrix run HP & LP?
- Eye pipe help?
- Dye hyper 3 problem. Need help fast!!!
- What kinda tequila do I have?
- Tadao for LED Matrix
- B Wing
- Bolts
- Where to get a DM5 solenoid cheaply?
- Gen-E LCD/DM3 Matrix Power Issue
- Dye DM7 problem
- Hyper 3 adjustment
- Parts identification please
- DM9 problem
- DM 7 vs 8 vs 9
- The Real (Unnofficial) Rotor Manual
- DM7 Problem
- DM3, What can you tell by a picture?
- Opinions on latest dye products
- Is this a Dye can?
- couple of Proto slg problems
- Matrix problems
- Can anyone ID this DM?
- DM7 Trigger Pin...exits which direction?
- Is this a dye frame?
- Help? DM3 isn't working...
- rolling orings again
- Replacing Hyper 2 Reg Seat - How to Remove the Old One?
- Dye Ultralight vs Superbolt
- dm4 bolt mod questions
- Hyper 3 tester help
- DM7 reset
- Wanted: Dye ultralite autococker
- Silly Question
- Longevity/wear issues
- dm3 tadao v5 issue.
- Dye input preference...
- dm11 first impressions
- 2011 Proto Rail and a 13ci tank
- How about a DM/Pm etc... review
- DM eyepipe in Original Matrix?
- DM3 Vert ASA
- Detents
- How to identify old Matrix Chip?
- DM5 problems
- My Dye Matrix Project
- Ironman Trix on ebay
- Newbie needing Tips
- Dye Matrix Kila Detents
- More DM3 Nood ?s
- DM3 LPR Question
- dm9 owners...
- New Dye Matrix Owner Needing Advice
- Tequilla matrix price
- UL Barrel backs...
- Going price on dm6's?
- Found solution. Please delete.
- DM5 Question
- Just got this Dye UL Cocker from a Time Capsule...
- Custom Dye Jerseys
- Nned help with pricing dm4
- Dm7 problem. I need dye help.
- 09 ul SLG machine guns on its own
- Dye Ultralite Cocker
- What's the difference?
- Differences betweem a '07-'10 PMR
- Will the rubber sleeve on a Hyper 3 fit a CP reg?
- PMR Question
- X-93 back bolt cap
- DM7 and up barrels
- PM8 balance...
- new to me Matrix w/single trigger frame
- DM8 Trigger ???
- PMR only shoots after 1-2 sec trigger pull
- PM5 problem
- Matrix Shootdown.. Not sure how to fix it..
- DM9 eye error
- DM3 backcap leak
- Taking out the Hyper 2 UR 07 O-ring in the body?
- proto?????
- proto slg 09 question?
- proto upgrade question??????
- tanks question?????
- BNIB never aired PM7 value?
- is it worth it?
- pmr 07 upgrade questions.
- DM3 troubles.
- proto slg 09 question?
- Gen-E/DM3 detent options?
- Hyper 3/4 problem
- PMR 09 leak
- How do i cap / change ROF on my Freeflow DM3 matrix
- Need help ID'ing Dye Barrels
- Another Dye Dm4 Question
- Dm5 Upgrades
- PM5 board
- PM6 a good gun?
- Toxic Matrix Appraisal
- Eye bracket screws
- DM3/DM4 backplate screw holes?
- DYE DM4 Question
- Dm3 eating eyes.
- Gen-E Matrix grips - what's the deal?