|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|01-19-2013, 10:49 AM||#2 (permalink)|
Well the integrated reg threads together in-line with the bolt and back cap, so a possible issue is that in theorey your reg could unscrew and dump high pressure air into the body of your gun.
|01-20-2013, 12:22 AM||#3 (permalink)|
Brass Monkey Customs
Join Date: Oct 2006
Location: Bowie MD
Having played around with one for the last few days, we have found some good and some bad
-Mags are cheap and a decent design.
-Grip and foregrip are nice to hold.
-Ergonomics are good.
-Well thought out drop stock.
-Good tool kit/Spares. They are incorporated into a dummy mag.
-The mag well is a separate piece, and looks to be usable in other designs.
-If you try to lock down the follower in the mag and you do not fill it completely, it will crush paint when inserted into the marker.
-If you do not insert the mag in one action, it will eject paint into the mag well and the second attempt to seat the mag will crush said paint.
-We had issues with the marker breaking paint using both hopper and mags.
-Switching between hopper and mag was not as easy as we had wished.
-Very difficult to clean. It requires an almost complete teardown to clean a magazine/breech break.
-If you do not tighten the two piece barrel together, before inserting it into the marker, you may have trouble getting the back out of the marker without removing the shroud.
-The sight brightness is lacking, even in full sunlight.
I am sure I can find a few more for either column, but not right now.
|01-20-2013, 01:30 AM||#4 (permalink)|
Nemo Me Impune Lacessit
Nemo Malus Felix
|Thread Tools||Search this Thread|