|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|02-03-2018, 12:15 PM||#1 (permalink)|
Join Date: Mar 2017
Two fat guys mech installation help!!!!!
I've had this kit for a while and I thought it would be easy to install or at least come with a manual but I was wrong. Im trying to put it into a special vibe or ion either. Just does someone have a video or a good set of instructions to help me install this finally?
|02-05-2018, 07:00 AM||#5 (permalink)|
Does anyone read this?
Join Date: Jul 2006
Location: Jordan Station, Ontario, Canada
If you got the Ion apart, you should be able to figure out how the mech kit goes in.
|02-05-2018, 02:18 PM||#8 (permalink)|
Join Date: Oct 2007
Location: Plattsburgh, NY
In the Vibe kit, the brass hex shaft running through the frame goes between the SMAV-3 and the aluminum bracket. Slide the assembled bracket over that shaft and rotate it into place (might need to loosen the SMAV-3 a bit). Once it is in place, tighten the set screw against the hex shaft and it will lock in place. Removing the trigger pin can make this significantly simpler.
|Thread Tools||Search this Thread|