|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|06-03-2019, 05:25 PM||#5 (permalink)|
Join Date: Jun 2009
Location: Orem, UT
I highly doubt it's an impulse bolt. I odn't think Hybrid ever made Impulse parts; their timelines didn't really overlap. My first thought was intimidator, but it doesn't look like the bolt pin would be in the right place. Which makes me think BL Defiant 2?
|06-03-2019, 06:47 PM||#6 (permalink)|
Could be an impulse bolt. There were a LOT of aftermarket parts for those, and it's one of the few bolts that would require that much length behind the bolt pin.
Does the bolt pin hole go all the way through with a detent in it?
One thing that might help is a few measurements. Say distance between center of the bolt pin hole and center of the air input hole. And then air input hole to bolt tip. The back length doesn't help, that tended to vary from bolt design to bolt design. And impulse bolts were often available with like 4 different back lengths to match different milling patterns.
Nunquam emere quid potes facere
|06-04-2019, 03:19 AM||#7 (permalink)|
1985 OG Paintballer
Join Date: Oct 2018
bolt pin hole does go all the way through and does have a detent, the measurement between center of the bolt pin hole and the air hole is 7/8". The measurement between the cent of the air hole and the tip of the bolt is 1-3/8". I hope this helps and thanks!
|06-07-2019, 11:22 AM||#10 (permalink)|
They only made these for cocker, intimidator and impulse
RIP - Ed "BigDaddy" Roth and "Indian" Larry
Wild Geese - Coney Isand White Fish - ECA
What Serial Number Is Your Cocker? WTB
ECAP - "Making players dreams other players nightmares"
|Thread Tools||Search this Thread|