mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 03-07-2008, 01:31 AM   #1 (permalink)
Post Whore
 
aqua_scummm's Avatar
 
Join Date: Apr 2006
Location: Los Angeles

Looking for some help with Nelson style bits

I am going to make a page, for nelson lovers to reference, and can use some help.

Just looking to show what's compatible with what so if you have XXX marker, you know what parts from other markers will work

Gripframes, powertubes, valves, valve nuts, bolts, hammers, sears, etc.

If you know of anything thats compatible with others, can you just post it up please?
__________________
Got an Outlaw game in the LA or San Francisco area? Please PM me!

aqua_scummm is offline   Reply With Quote
Old 03-07-2008, 11:26 AM   #2 (permalink)
Z50
Seasoned Member
 
Z50's Avatar
 
Join Date: Mar 2006
Location: Boston Massachusetts

I know that the Lapco bore drop bolt is too long for a razorback by about .125" on the barrel side and about the same shy on the valve side. The hammer will work but is a bit on the sloppy side, the power tube works just fine.
__________________
Quote:
Originally Posted by Tescrash View Post
Almost only counts in horseshoes in handgrenades....
Z50 is offline   Reply With Quote
Old 03-07-2008, 06:11 PM   #3 (permalink)
MCB Member
 
Fubarius's Avatar
 
Join Date: Apr 2006
Location: New Richmond, WI
Send a message via AIM to Fubarius Send a message via Yahoo to Fubarius

Brass and Wood Fan
PPS Fan
Trracer grip frames will fit on a Kingman Hammer (you'll have to use the thumb screws from the hammer, and add a few washers). Haven't tried the reverse yet, but when I get a minute I'll give it a shot. Valve bodies are different lengths, so not compatible. Pump arms will trade with out much work. I'll try the rest of the internals when I get a chance.

If anyone can do a quick comparison between hammer and phantom parts (namely hammers, valve cap, powertube, and valve body) I'd greatly appreciate it.
__________________
David Johnson
aka Fubarius

Nunquam emere quid potes facere
Fubarius is offline   Reply With Quote
Old 03-07-2008, 09:15 PM   #4 (permalink)
Banned
 
Join Date: Feb 2007
Location: Monmouth, Oregon
Send a message via AIM to CamoDeafie Send a message via MSN to CamoDeafie

Trracer/maverick internals can exchange with old razorbacks, know for sure that later trracers have different valve retainer threading than standard nelson asa, there's 2 shapes of the nelson type valve, the original with a groove and thru-hole for screw and the later ones with the bottom hole having a shorter depth and requires long bodies, as oposed to nelspots' short body, CCI valve components can interchange with standard nelsons, up to a point, in which powertube lengths can vary, with the newer CCI tubes being much shorter than standard or razorbacks', I have found that lapco tubes fits on razorbacks and some trracers,
Also, there's the bore drop bolts vs breech drop bolts, most should interchange with some differences, sears also can vary with models, but in general, if they're nelson based, should be universla, but its not always the case. Im not sure of grip frames, I know phantom grip frames won't fit anything else to my knowledge, whereas razorbacks and trracers will work back n forth, not sure bout other models.


EDIT: B has a link in his sig I think, for nelson owners group where there's a whole smorgasbord of info
CamoDeafie is offline   Reply With Quote
Old 03-08-2008, 05:00 AM   #5 (permalink)
Active Member
 
Join Date: Oct 2007
Location: Barford, Warwickshire, England

Hey AS - I asked a pretty similar question a while back: https://www.mcarterbrown.com/forums/p...son-pumps.html

Hope you might find something useful in there.

regards
pizzadude is offline   Reply With Quote
Old 03-10-2008, 03:48 AM   #6 (permalink)
Post Whore
 
aqua_scummm's Avatar
 
Join Date: Apr 2006
Location: Los Angeles

awesome, thanks!
__________________
Got an Outlaw game in the LA or San Francisco area? Please PM me!

aqua_scummm is offline   Reply With Quote
Old 03-10-2008, 06:29 PM   #7 (permalink)
Active Member
 
Join Date: Oct 2007
Location: Barford, Warwickshire, England

When I get my other stuff in the post, I'll take some pics to let you know what I'm swopping between my pumps and what fits/works.
pizzadude is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC