-   Autocockers (
-   -   autococker build part list? (

nuthb606 01-21-2013 12:33 PM

autococker build part list?
So I would like to build a autococker pump from the ground up.I plan to get this body

here is what I know it is possibly a 2k1 what i've been told

"Midblocked body. Very clean, professionally done midblocking job. I decided to do the ego feedneck mod myself and the dremel ran down the side of the body, marring the anno finish, pictured. Comes with bolt, sled-style backblock and midblock length pump arm."by seller

What other parts do I need besides a trigger frame,regulator and pump kit?List of parts would be great thanks.Also maybe short description of parts that are upgrades.

What regulator should I get for it.I would like to be able to switch from pump to a regular autococker because I haven't tried pump play yet.

NEW QUESTION for the pump kit will any center guide rod work on any type of pump handles?

simenaa 01-21-2013 12:50 PM

you do not need anything else than those you mentioned, if you dont have the lower tube kit, not to sure from the pic
valve spring
hammer spring
and the two screws for the valve

and if you want to make it mechanical you need

frontblock banjo bolt
and hose

nuthb606 01-21-2013 01:01 PM

awesome thanks would this work, if i were to get it new ? Check It Mid Block/Half Block Autococker Lower Tube Kit

or used this work? + a mid block hammer they have for sale
WGP Autococker Lower Tube Valve Kit Freeflow ANS Macdev Akalmp | eBay

Zanied 01-21-2013 01:10 PM

The first one will work, the second one looks like stock wgp internals and the hammer is not slotted for a mid block. The check it is maybe a slight upgrade im not sure, but it has the slotted hammer for the mid block.

nuthb606 01-21-2013 02:36 PM

Ok so if i get a pump kit I will have to get different length rod right? If so what size? Thanks for the help guys

shredxcam 01-21-2013 02:58 PM

Half block size. Or cut it and re thread it your self

nuthb606 01-21-2013 03:45 PM

i found the half block sizes on paintballgateway but it says 2k5? will those work even though it says 2k5

nuthb606 01-22-2013 08:54 AM

new question up... still don't know operating pressure of autococker?

simenaa 01-22-2013 09:59 AM

it dependt, to crono cockers screw in the ivg 2-3 times from flush, and increase the pressure from the reg until peaks. adjust the ivg if necessary

super_stanchy 01-22-2013 10:07 AM


Originally Posted by nuthb606 (Post 2600447)
new question up... still don't know operating pressure of autococker?

about 300 psi, each valve/spring combo has its own actual pressure

most are between 225-400psi

i normally set my reg to a scosh over 300, IVG 2.5 turns from flush
if im within 20fps, i adjust with IVG
if im not within 20, i adjust with my reg

All times are GMT -4. The time now is 07:21 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC