|jimmy4chevy ||12-16-2013 12:55 AM |
WGP Black Magic inline reg leak from exhaust pinhole.
Piston o ring seems fine however i did not replace it. Just blows air out of the pinhole on the side of the reg. Very "mind-bottling"
|JaKaL ||12-17-2013 01:38 PM |
Perhaps the output pressure is simply cranked up too high?
|jimmy4chevy ||12-18-2013 04:18 AM |
I turned it all the way in and it's still leaking.
|FrankW ||12-18-2013 10:06 AM |
Check the little oring under the top hat. That's probably the culprit.
|jimmy4chevy ||12-18-2013 03:42 PM |
i replace the oring under the top hat. i give up :( i have a spare hyper2 in my toolbag to use that matches my gun anyways. bummer
|FrankW ||12-18-2013 08:23 PM |
Not that I'm an expert, but I figured for a vent hole leak it pretty much had to be either the piston oring or the piston stem oring. Maybe there's dirt/debris in it?
I applaud you for getting to the piston though... I hate trying to open those things up.
|jimmy4chevy ||12-19-2013 01:21 AM |
Yeah I had to macgyver a normal pair of needle nose players into c clip pliers. The shim stack seems fine and completely the way it came stock. A leak from the exhaust pinhole means too much pressure right? I need an o ring kit for this god damn thing
|FrankW ||12-19-2013 02:18 PM |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC