| ||Thread Tools||Search this Thread|
|12-18-2013, 08:00 PM||#6 (permalink)|
Join Date: Dec 2011
Location: Los Angeles
Have you tried flipping the urethane seal in the piston as well? You may need a dental pic or similar tool to dislodge the seal. A total rebuild may be easier. Here is a 2 part video.
Mostly mechanical autocockers
Last edited by paintballedbackin88; 12-18-2013 at 08:08 PM.
|12-18-2013, 08:23 PM||#7 (permalink)|
Join Date: Mar 2012
Location: So Cal (OC)
Not that I'm an expert, but I figured for a vent hole leak it pretty much had to be either the piston oring or the piston stem oring. Maybe there's dirt/debris in it?
I applaud you for getting to the piston though... I hate trying to open those things up.
|12-19-2013, 01:21 AM||#8 (permalink)|
Join Date: Dec 2013
Yeah I had to macgyver a normal pair of needle nose players into c clip pliers. The shim stack seems fine and completely the way it came stock. A leak from the exhaust pinhole means too much pressure right? I need an o ring kit for this god damn thing
|12-19-2013, 03:02 PM||#10 (permalink)|
Join Date: Jun 2009
Location: victorville ,Cali
Sounds like the reg seat,
WGP Regulator Part - Urethane Piston Seat - Fits: Preset/Ergo/Black Magic/Karnivor
Ebay, camocow200 (1390) + 100% positive feedback
darr_musi (640) + 99.9% Positive Feedback
MCB (350) + 100% positive feedback
|Thread Tools||Search this Thread|