| ||Thread Tools||Search this Thread|
|07-13-2018, 03:08 PM||#1 (permalink)|
I'm working on a set of pneumatics for a project and I have a few questions. The pneumatics are pre 2k (brass ram and 3 way with aluminum lpr).
1) First, what is the output pressure of the lpr?
2) The Barb seem to be #6-32 thread, am I correct?
3) Can the 3 way be re-taped to move the location of the fitting?
I will probably have more questions as my project goes on ...
Love my SSR
Love my brass
... hard choice ...
Looking for pgp ... Shoot me a PM if you have a spare one
|07-13-2018, 05:43 PM||#2 (permalink)|
Does anyone read this?
Join Date: Jul 2006
Location: Jordan Station, Ontario, Canada
I believe the stock LPR is set at the factory to roughly 90 psi. They are adjustable.
No idea on barb thread, although that sounds correct
Last edited by Jordan; 07-13-2018 at 07:19 PM.
|07-15-2018, 10:48 AM||#3 (permalink)|
Join Date: May 2012
Lpr is internally adjustable, I would bet it is NOT 90psi any longer as the spring will lose force over time
If you are talking about moving one of the Barb's on the 3 way, technically sure it is possible but you would need to plug the existing hole, drill and tap a new one and do all that without having anything interfere with the o rings inside the 3 way
^^^ If you are new to the sport and need help finding gear, click here!!!^^^
|Thread Tools||Search this Thread|