mcarterbrown.com  

Bob Long BLAST - Bob Long Action Sports Technologies

Reply
 
Thread Tools Search this Thread
Old 10-03-2016, 07:33 PM   #1 (permalink)
Newbie
 
Join Date: Sep 2015

Bob long MVP Help

I am in need of some guidance my main body Oring was pinched and caused the marker to have an air leak down the barrel. I have since replaced the Oring and I am still having the same issue. I have read the manual several times and have gone and replaced the rest of the orings with new ones but continue to have the same issue. Thank you in advance for any help
SoLoE is offline   Reply With Quote
Old 10-03-2016, 08:31 PM   #2 (permalink)
Seasoned Member
 
No Have MSG's Avatar
 
Join Date: Aug 2013
Location: Oregon

Pull the bolt out and reinsert the bolt engine. Put it back together and air it up. If you put your finger over the tip of the blast guide and it stops leaking it is the blast guide oring. If it keeps leaking it is either an oring on the outside of the engine itself or the inner can oring where the blast guide comes through the front of the can. I would bet it is the blast guide if it is leaking down the barrel.
__________________
My Little feedback thread
No Have MSG is offline   Reply With Quote
Old 10-03-2016, 09:00 PM   #3 (permalink)
Newbie
 
Join Date: Sep 2015

Thank you for your recommendation I will have to try that tomorrow when I go fill up my tank since all my air leaked out today trying to fix it.
SoLoE is offline   Reply With Quote
Old 10-05-2016, 01:13 PM   #4 (permalink)
wookie in a mask
 
p8ntballr68059's Avatar
 
Join Date: Aug 2009
Location: Cornandcowville
Send a message via Yahoo to p8ntballr68059

PPS Fan
i would bet it is the inner can oring. on most marq engines i have encountered this is the cause of the leak like this
__________________
Agglets are but a stain on the paintball community
vicous fan 42
NEBRASKA BALLAS PM ME IM LOOKING FOR A TEAM

p8ntballr68059 is offline   Reply With Quote
Old 10-05-2016, 01:36 PM   #5 (permalink)
B.A.M.F.
 
Super69ur's Avatar
 
Join Date: Mar 2011
Location: Victoria, BC

CCM Fan
Yeah I would read the manual and take a look at the blown up cross section of how the engine is Put together and replace every Oring you can see. Sometimes the small orings inside the shaft pieces are hard to see unless you know where to look.
Super69ur is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Bob Long

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:06 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC