|Brass Eagle Brass Eagle owners can hang out here|
| ||Thread Tools||Search this Thread|
|08-18-2013, 02:19 PM||#1 (permalink)|
Paintball is my Obsession
Join Date: May 2011
Location: Pittsburgh, PA
Shim stock for nightmare rebuild?
For those of you well practiced in rebuilding nightmares, do you use the shim stock trick for installing the valve and pierce pin assemblies? If so what size shim stock do you have good luck with? I know the sticky thread says any thing thicker than .001, but what is a good thickness that makes the job easy, but the shim stock does not get damaged? Also, what size piece do you use? 8"x3" ?
|Thread Tools||Search this Thread|