-   CCI (
-   -   Grey ghost hammer in a phantom (

commandoman 07-08-2012 03:03 PM

Grey ghost hammer in a phantom
Was looking at ASP's store, and they have these in stock, my question is, can I drop one in my phantom to use straight-away (to increase shot count on 12ies)

idkfa 07-08-2012 07:59 PM

You have to replace the sear to work with the Phantom trigger, if memory serves.

BassDude 07-09-2012 12:11 PM

yuo. You have to modify the hammer. Honestly, I would just buy the SSC tri fluted hammer. I had a gret ghost hammer that OI couldnt get to work in my Phantom

cncaliguy 10-02-2012 08:34 PM

Take the phantom sear and transplant it on the grey ghost hammer is the fastest route. You can keep the grey ghost sear and rework it. You also need a heavier main red spring.

tiny 10-02-2012 08:38 PM

I believe Splatttttt tried the transplant and it wasn't possible. I believe you can just cut down the seer to work.

cncaliguy 10-03-2012 02:06 AM

Sorry, I have a different sear from older style sear. My situation may not apply with modern parts.

kuhn101 10-04-2012 08:21 PM

When i did it i had to switch the sear with thea cci sear, then use jb weld to build up part of it to position it properly

russc 10-04-2012 08:30 PM

Yep, same. I used epoxy to hold the sear up, otherwise it drops down and doesn't latch.

chrislognshot 10-10-2012 06:01 PM

there few this one is do what they said. also do you have older model or near model. since he change the hammer over the year.

All times are GMT -4. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC