|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|12-01-2018, 12:34 AM||#1 (permalink)|
Join Date: Jul 2009
Location: Las Vegas, NV
3d Printed 90* JCurt-style Grip
I got a request to design a 3d printed grip frame similar to the JCurt. I think it turned out pretty good!
These are printed out of ABS. I decided to print the frame as two pieces in a 70/30 split, with embedded 10-32 nuts to accomodate a bottomline. The frame halves are connected by triangular socket screws, which are hidden behind the right grip panel.
A bottomline would mount parallel to the bore, but if need be I can modify the frame to retain the same angle as the CCI 45 Grip, or with a steeper angle so that a CCI stock would be parallel to the bore. Since the frame is printed, I'd suggest not hanging anything heavier than a T-stock or 3.5 CO2 tank from the bottomline. I'll have to run some durability tests to see if it can handle anything heavier.
I'll put them up on the website if there's any interest. Price will be $20 + $5 shipping via First Class in the US. As always I can quote internationally well; PM me for a shipping quote.
|12-06-2018, 11:09 AM||#3 (permalink)|
Join Date: Feb 2017
Location: Near Houston TX
I've got one on the way, but it seems to have stalled in Dallas. Oh well. Patience is a virtue, or so I hear.
|12-06-2018, 11:46 AM||#4 (permalink)|
Not very good
I will share pics when I get home tonight. I have it on a pistol setup. It is super comfy and points very well.
Eagles may soar, but weasels don't get sucked into jet engines.
|12-06-2018, 01:06 PM||#5 (permalink)|
Pump Battle Rager
Join Date: Mar 2008
Location: El Paso, TX
Raptor69r`s feedback link:
|Thread Tools||Search this Thread|