|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|04-14-2019, 09:58 PM||#1 (permalink)|
Make Paintballs Big Again
Join Date: Jul 2008
Location: Salt Lake City, UT
Lapco .681 + stock pump handle question
For a very short time, I had one of th Lapco barrels and only ever attached it to my Phantom at the time. These are said to work with the stock pump handle and while I could still cock it back and forth, it felt like it was rubbing on the barrel. Stock barrel felt just fine.
Anyone else run into that? I know a UC kit would fix everything, but don't want to spend the extra on one yet.
|04-14-2019, 10:36 PM||#2 (permalink)|
Join Date: Jul 2015
I used one for a good while with the stock pump handle and it was fine. Not as smooth and felt like there was a little extra play though. Like all my posts here, I prefer the factory CCI non bored barrels. LOL
The lapco did shoot really well with the right paint, but a lot less forgiving when paint ran larger. I also used CCI detent rings with it and no issues.
|04-14-2019, 11:21 PM||#3 (permalink)|
Ole' Papa Pump
Join Date: Oct 2012
Location: Chardon, Ohio
Started with a Splatmaster, moved onto a Nelspot 007, then came the Autocockers, then a STERLING Pump, next was a Bob Long defiant then a PM7. As of now I have 8 Sterling Pumps, 4 Phantoms, 4 PGP's, a P68SC, 2 Trracres, a 2K+ Sniper, 2 Nelspot 007's, a Bushmaster and a Carter Buzzard
|04-15-2019, 05:20 AM||#4 (permalink)|
Join Date: Aug 2006
I had a lapco and am not into undercocking kits.
I thought it fit perfect.
Pump that sucker till the anno is gone.
That's how people will know you mean business.
My MCB feedback thread
I shoot 1-bps.
And it'll be up close.
|Thread Tools||Search this Thread|