Originally Posted by Yumarattler
So I am going to send my S6 for anno so I need to tear it down. Does the pump rod thread into the pump plate or is it pressed or glued? Also how does the beaver tail loop come off of the rod? Sorry if this is dumb I just don't want to force it and break something
It is red loctited in the plate so it cannot be removed unless you heat it up and remove it. They are set specifically when they leave CCM. Only a professional should remove the rods, and re-install them. Removing them will also void your warranty.
If i were you..
id Call Mel at CCM, Im sure you could work something out.