mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   CCM (https://www.mcarterbrown.com/forums/ccm/)
-   -   The New CCM Sniper Rifle Thread (https://www.mcarterbrown.com/forums/ccm/124058-new-ccm-sniper-rifle-thread.html)

CCMachinist 04-13-2010 10:58 PM

The New CCM Sniper Rifle Thread
 
Ok pics first and I'll gab about it later.

https://www.machineshopdpm.com/webphotos/ccmsr-5.JPG

https://www.machineshopdpm.com/webphotos/ccmsr-6.JPG

https://www.machineshopdpm.com/webphotos/ccm-8.JPG

https://www.machineshopdpm.com/webphotos/alpha-1.JPG

https://www.machineshopdpm.com/webphotos/Mag1.JPG

CCMachinist 04-14-2010 02:40 PM

here is a pic of the AR-15/M16 style of grips. We are going to use the style on the right

https://www.machineshopdpm.com/webphotos/argrip-1.JPG

https://www.machineshopdpm.com/webphotos/argrip-2.JPG

CCMachinist 04-14-2010 02:48 PM

Quote:

Originally Posted by doc Zox (Post 1260061)
I see a mag well


This is the style we may end up using. Of course it will have to be modified. There will be two styles one for shells and one that just feeds the FS paintball


https://www.machineshopdpm.com/webphotos/mag-1.JPG

CCMachinist 04-14-2010 05:00 PM

Quote:

Originally Posted by Redbeard the Pirate (Post 1260208)
Will the stock be removable?


Not it won't be removable. Again, expect changes in the final product.

CCMachinist 04-14-2010 09:26 PM

Quote:

Originally Posted by DSA (Post 1260636)
Back on topic, looks fantastic just call mine sold! The MSG looks even better than before. As for the shells will you offer delrin I would hate to drop and ding the pretty ones up. Ghillie suit is ready to Rock now just to get Brandon to allow me to use one on the field...

We will make 2 style of magazines. One will use the traditional shells. The other will feed the FS only into a locked in the receiver shell sizer.Delrin shells are a possibility.

CCMachinist 04-14-2010 09:40 PM

we made some radius cuts today. its pretty slow going but the first part always is.

https://www.machineshopdpm.com/webphotos/ccmsr9.JPG

CCMachinist 04-14-2010 09:47 PM

Quote:

Originally Posted by BigAlPoulos (Post 1260760)
I do not usually comment on new guns... But this is simply amazing. I was going to buy a t 9.1.. but this is stopping me DEAD in my tracks..


are you saying these could possibly be used with blank shot gun cartridges?

and if it hasn't already been said enough.. Price!?


The shells are actually sizers. The First Strike like round paintballs vary in size.
Shot shells would have to be modified slightly plus they wouldn't have the sizing capability.

Pricing has not been established.

CCMachinist 04-14-2010 09:54 PM

Quote:

Originally Posted by ASKA (Post 1260400)
That's what always drifts me away from CCM. Hopefully when this comes out, the prices of the older guns will lower and will hopefully snag me a <$300 S5.

I don't think this will affect the price of our other guns. This is totally different than anything we have ever made.

This will be a very low production gun. Maybe a hundred or so.

CCMachinist 04-15-2010 02:43 PM

Quote:

Originally Posted by pk5 (Post 1261752)
From the look of that back stock, in theory, would it be possible with a little modification for it to work with a T2?

Sorry, not even close.

CCMachinist 04-15-2010 02:47 PM

Quote:

Originally Posted by BigOldSkool (Post 1261722)
Damn damn damn... the field I play at need to make their mind up about first strike rounds.

Find a few wooded acres and hunt each other down. If your not shooting 60 yards plus you would not be using the full potential of the FS or the rifle.

CCMachinist 04-16-2010 02:43 PM

We will have it off of the fixture plate soon. I will do another pic then.

kind of like an AR lower. But much better.

https://www.machineshopdpm.com/webphotos/arlower.jpg

CCMachinist 04-17-2010 02:15 AM

Quote:

Originally Posted by i8pie2day (Post 1264242)
i think you might have skipped over my question (and i just want to bump this up) if the first 100 sell quickly, will you guys be doing more of these?


if 100 rifles sold, we would make more.

CCMachinist 04-17-2010 12:08 PM

Quote:

Originally Posted by RepomanGene (Post 1264752)
to be honest...I have never had a mask/stock problem,but i can see some people might.

still, try the 45 offset one time and you will wonder why you waited so long


Good suggestion Repo. They even offset scopes on real guns.

Warne Scope Mounts New Red Dot Offset Mount

There is a video somewhere on these mounts.

CCMachinist 04-19-2010 03:55 PM

Ok, the lower came off the mill today. Of course this is only the right side. The left side will go a lot faster.


https://www.machineshopdpm.com/webphotos/ccmsr-10.JPG

CCMachinist 04-22-2010 09:36 AM

Quote:

Originally Posted by Buccaneer (Post 1272185)
Looking good......:drool:..........a bit to good, I am afraid that this will never be accepted by our funny gun rules here in the Netherlands.

Well, saves me some money :censored: :bang:


Your money is not that safe.We will also be standard style rifles. Like the M24 and so on.

CCMachinist 04-22-2010 01:51 PM

Quote:

Originally Posted by DSA (Post 1272604)
Hozabout someore eyecandy ;)


We had to stop and do some other work. We are getting closer though.

CCMachinist 04-22-2010 01:53 PM

Quote:

Originally Posted by Deuce (Post 1272385)
Yep, bolt action unless that changed from the last thread.




Wait... You guys are branching into firearms? Or does that mean you're going to do different models based off the design?

First Strike guns. Of course its not much more effort to go to real steel at this point. But paintball is more fun and no paper work.

CCMachinist 04-22-2010 03:48 PM

Quote:

Originally Posted by Instien'spaintball (Post 1272786)
Only if you sell it Bill! One in real steel just to prove you can!
Nice Eye candy and a great new toy! You can't sell the One real one so this one you Have to Keep!!!:gunsfiring:

Actually real guns would be easier to make. You don't have to worry about an air system.

CCMachinist 04-23-2010 01:03 AM

Quote:

Originally Posted by Mayvik (Post 1273812)
So Bill..any chance we're going to see a rifled barrel on these that mates up nicely with the fins on the FS rounds? :drool:

We really haven't tried anything other than traditional barrels. I'm sure someone will come up with a magic barrel.

CCMachinist 04-23-2010 10:24 PM

Quote:

Originally Posted by chopper duke (Post 1274947)
Mayvik and I were talking about this is chat last night. I was wondering if giving a barrel a 1 in "X" twist will help spin the FS rounds for further distance/ better accuracy.

Maybe TA has tried it. Or CCM.

No, I have done just smooth bores so far. I know FS doesn't like raw barrels. A little WD-40 in the raw barrel made it go zippidy do da. Let me back up. That was our delrin FS don't like raw barrels.

The curious thing is when you look down the barrel after a few dozen shots the barrel looks like it has straight rifling in the bore. I have no idea whats causing it. It looks like dust. It cleans out easy enough.

CCMachinist 04-26-2010 10:41 AM

Quote:

Originally Posted by Twilight (Post 1277756)
:clapping:

So this is going to be fairly lightweight, right? :p


Not even close to lightweight .:)

CCMachinist 05-04-2010 01:24 AM

Quote:

Originally Posted by DSA (Post 1288791)
Keeping the faith any new pics Bill?


Not lately. We had to start some other parts.I'm chomping at the bit also to get this project done.:old:

CCMachinist 05-17-2010 09:25 PM

We are still catching up also Something old, Something new

CCMachinist 05-17-2010 09:32 PM

no brass yet.:(

CCMachinist 05-20-2010 10:01 PM

Quote:

Originally Posted by cmosser502 (Post 1315482)
Are you naming this the CCM SR-5? Just curious...

I've just been calling it the SR1 for gp. It won't be the Series 7:ROTFL:
We will be back on the SR1 soon. We just finished working on some secret projects for LL. Melissa will fill you guys in later. Its pretty cool.:clapping:

CCMachinist 05-21-2010 10:03 PM

Quote:

Originally Posted by pumpkid025 (Post 1315798)
"We will be back on the SR1 soon. We just finished working on some secret projects for LL. Melissa will fill you guys in later."

Secret projects for Mel ?

Tell us good sir, mel will not find out !

Melissa already knows about the secret projects. Like I said,something old something new.:old:

CCMachinist 05-22-2010 05:11 AM

Quote:

Originally Posted by arcticmonkey1 (Post 1317281)
The CCM Revolverrrrrr!!!!!!! :DDDDDD

I wish:drool:

CCMachinist 05-22-2010 05:12 AM

Quote:

Originally Posted by splattttttt (Post 1317212)
Finally finished that all brass T2 :drool:

Not yet:(

CCMachinist 05-22-2010 05:13 AM

Quote:

Originally Posted by Deuce (Post 1317046)
Slider frame!

Lol, I know that's a negative but a guy can dream. :)

Sorry, no slider

CCMachinist 05-22-2010 05:14 AM

Quote:

Originally Posted by ironchef97 (Post 1317038)
CCM semi?

Thought about makin one.

CCMachinist 05-22-2010 01:20 PM

Quote:

Originally Posted by ironchef97 (Post 1317489)
Hm...what does every field operative need aside from his trusty CCM Rifle? A sidearm!


CCM autoloader sidearm :drool:??

now that is on the list.:gunsfiring:

CCMachinist 06-01-2010 09:52 PM

Now you guys know why we stopped working on the SR1. We were making the S6.5 and a few other things for LL.

incynr8 06-16-2010 12:54 PM

up to the top

I closed the old thread and moved ALL of CCMachinists posts into one wonderful array of pics and information here.

Whee McGee 06-16-2010 01:04 PM

Thanks for the cleanup. I appreciate being able to see all the information without sorting through all the pages.
I'd also like to thank CCM for continuing to produce such spectacular pieces of work. I'm sure this will be well worth the patience everyone is attempting to show, and we're all very eager to see the finished product. :)

freebird 06-16-2010 02:01 PM

Quote:

Originally Posted by incynr8 (Post 1354439)
up to the top

I closed the old thread and moved ALL of CCMachinists posts into one wonderful array of pics and information here.

Amazing!

Now i can ask some questions i have been wondering.

Will the mags be composite or aluminum?
Will the shells be composite or aluminum?

I could potentially see some cost savings making these two parts some sort of composite material. It would make replacing shells and mags WAY cheaper.

On another note. Will this take its very own barrel? Or do i hear cocker threads?

=]

LU_aDaK 06-16-2010 08:59 PM

https://img4.imageshack.us/img4/2928/...024x768275.jpg
https://www.youtube.com/watch?v=<object width="480" height="385"><param name="movie" value="https://www.youtube.com/v/OvzdVFHHXag&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="https://www.youtube.com/v/OvzdVFHHXag&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

In the video they state that it comes with composite magazines, I would think CCM would do the same.

Barrel is an interesting thought. I am not sure how they are going to target that, being as it will be quite long. It would be interesting for ccm to chime in on that....

ironchef97 06-17-2010 01:53 AM

incynr8, can you add these photos to the first post?

https://www.machineshopdpm.com/webphotos/alpha-1.JPG
https://www.machineshopdpm.com/webphotos/Mag1.JPG

Butch 06-17-2010 02:22 AM

The rifling/dust you mentioned WAY back, is I believe, plastic from the fins rubbing off. My barrel after shooting 1 round, had a small plastic streak down it.

EDIT: Any idea on possible pricing? Even a tiny inkling?

pumpbusters 06-17-2010 02:24 AM

Do you have any estimate of the price yet?

incynr8 06-17-2010 08:00 AM

I added the pics to the first post, hope thats ok with CCM.


All times are GMT -4. The time now is 03:31 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC