|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|10-23-2010, 06:36 PM||#1 (permalink)|
Join Date: Apr 2009
I just got a new lower tube kit and the hammer has this rubber ring/lining right before the threads for the cocking rod to screw in that is not allowing me to screw in the cocking rod. Is this rubber piece normally there? Please help!
|10-24-2010, 09:22 AM||#2 (permalink)|
"Set The Bar Low"
Yeah, it's suposed to be there, it helps hold the cocking rod tight. it is actually the same as the cocking rod bumper on the ccm rod. I don't under stand why it would be stopping you though, usually just push the rod through it and then turn to thread in. Whats not happening, the rod won't go past it or it just won't bite on the threads once past?
MY FEEDBACK @ MCB
MY FEEDBACK ON EBAY
A long time ago I met a Man I called my friend. Why now, many years later, can't I remember his face? Has He left, or have I just chose not to look?
|10-25-2010, 11:05 AM||#3 (permalink)|
Please feel free to call us with any tech questions you may have. Thanks!
|Thread Tools||Search this Thread|