help needed with C/F Trigger
I have just got the trigger this week and started on the drawing what I need to know is the distance between the top of the frame to the top of the trigger, this is needed to work out if I can fit a 1/4 OD bearing in the trigger
Also some pictures of the trigger in frame at that area would be good
John, give me a call next time you're up brisbane way, you can have a look in person, 0416 149 169
I need this before I will be coming up to Brisvagas
I'll see what i can do for you in the morning
Gimme 30 minutes and I'll get some.
Looks like the C/F triggers for the CCM frames is dead because no-one seems to want to help with them
Just going to be making a couple for the people who sent me one
**** I got held up a bit. The distance is just about 1/8th of an inch from the outer edge of the trigger pivot point to the top of the frame. I can take som pictures on a blue 86 frame I you can't make out the detail. I know black on black doesn't help much.
:( There seemed to be a lot of interest for these.... Sorry acid, I would help you out but my S6.5 is missing its trigger :p ;)
I would totally but one, my CCM won't be ready for a few weeks yet, unfortunately..
I have recieved the dimension and picture I needed
|All times are GMT -4. The time now is 06:58 AM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC