|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|12-03-2012, 03:57 PM||#1 (permalink)|
Brass Pump handle
Here is a prototype pump handle that is based on our carbon handle design but with a new twist. You can install the return spring on the inside.
The old design had to have the spring on the outside small guide rod.
This is a brass tube with the EZgrip finish machined on the OD.
With the pump rod this handle weights 7oz.
It also has the Series 6 pump plate.
I can custom fit this to just about any pump gun you want as long as I know the length of rod to what you are going to put it on.
It will replace your existing standard CCM pump kit.
This will not fit the T2.
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.
|12-03-2012, 04:06 PM||#2 (permalink)|
|12-03-2012, 07:16 PM||#3 (permalink)|
Join Date: Dec 2007
Any chance this will fit the new J12? I dont see where it would not but i am not 100%
Wish you had a brand new Excal or Viking? Click HERE!
|02-15-2013, 02:19 AM||#5 (permalink)|
Join Date: Apr 2010
Location: With Loggy and Jenny
How did I not see this. It looks great!
|Thread Tools||Search this Thread|