|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|02-15-2013, 05:12 PM||#1 (permalink)|
Red - Black
Shirt Design #3 - Ideas.
So - the people have spoken - I will be making a run of two shirt designs:
I will likely have the font made a little smaller as a way of shooting the middle of design #1 and #2 - I will show you this change in the pre order.
There has been some talk about the technical specs on the left side of the shirt. I am not totally happy with these specs and would like input on what should be added.
So - this is your chance - Either tell me to leave it alone - or give me a list of specs you would include in this area.
Currently there is:
1) Marker Type
3) Input Pressure
I am not happy with how Input Pressure and BPS is shown either - so feel free to give suggestions on wording on that too.
I will take ideas over the weekend and then put up a pre-order next week.
Pumpenstein - NSA National Champions
TF's MCB Trust.
Last edited by Talfuchre; 02-15-2013 at 07:06 PM.
|02-15-2013, 06:04 PM||#3 (permalink)|
1) Marker Type: Pump
2) Manufacturers: CCM
3) Accuracy: Deadly
4) Owner: +1 PB Cred
I would also rotate the text so they align under the barrel with the slant as the J12 wording.
"Originally posted by Element Paintball@pbnation: you realize it would be easier to get a new wife than a new dc2."
My MCB Feedback
|02-15-2013, 06:13 PM||#5 (permalink)|
|02-15-2013, 07:11 PM||#8 (permalink)|
Yeah, maybe something on the back to break up all the open space that would be back there with it bare, nothing huge, its up to you though. I would like the last choice much better with no specs, at least not on the front. If they are in there it definetly needs to say Made in the USA, i think thats very important.
|02-15-2013, 09:14 PM||#10 (permalink)|
Off topic, but any chance for a long sleeve t??
I finally decided to start a thread for my Feedback: https://www.mcarterbrown.com/forums/f...-feedback.html
Rocking it for the Fringe Division!
|Thread Tools||Search this Thread|