|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|12-04-2017, 10:34 PM||#1 (permalink)|
Join Date: Dec 2017
Location: Houston, TX
So I bought a new Toy
It was a wall hanger, so any recommendation where to start to get it up and running again? Should have the marker in my hands end of this week or early next week. I've got a rail, on/off and some pneumatic fittings laying around.
Thanks in advance.
|12-05-2017, 07:49 AM||#2 (permalink)|
Fluffy Bunnies for life!!
Nice snag, I was watching that on Fleabay. A couple of drops of oil run through it will help, if the orings are bad then a complete rebuild. Otherwise the S5 is one smooth cocker.
|12-05-2017, 12:16 PM||#4 (permalink)|
Join Date: Feb 2017
Location: Moorpark, CA
Hi James, nice pick up! You can contact me if you have any questions, I also sent my cell #. Please do take the time to lube up the o-rings before playing with the gun, I wouldn't shoot it without a disassembly. I aired it up a few months ago and it did not leak, but I know the o-rings are all dry from time.
|Thread Tools||Search this Thread|