New Series 5 Owner Here w/ a Couple of Questions...

destro7976 · 02-24-2008, 05:29 PM

I just received a used Series 5 and need some help.

First...There is a slight leak in the three way and I was wondering if CCM 3-ways tend to be finicky or if I just need some new orings?

Secondly...The back block sticks in the rearward position from time to time causing a leak out of the end of the ram. What might be causing this? When I move the ram by hand it seems smooth...so any help would be great thanks!

I just want to get her shooting as good as I've heard she can.

spymongoose · 02-24-2008, 06:03 PM

sounds to me that the timing in the three way is off. I would have you verify that that's the case first before you monkey with your timing rod, but I think that explains both your problems... with the 3way shaft timed too early it would leak out or hold the back block rearwards sometimes.

pump · 02-27-2008, 04:17 AM

you can also get the new pistons....there OMG smooth.....speeds up cycling time noticably

then you can also add a QEV to the ram....then you just talking crazy talk

destro7976 · 02-28-2008, 12:53 PM

Thanks for the suggestions, though the timing doesn't seem too bad. It actually will cycle alright sometimes and then stick open, but there is always a tiny leak in the three way and if I touch the actuating rod at all air dumps out...
Where would I go to obtain the upgades you're talking about Pump? Just CCM's ebay store? Thanks for the help. I'll keep tinkering...

spymongoose · 02-28-2008, 02:34 PM

Quote:

Originally Posted by destro7976

It actually will cycle alright sometimes and then stick open, but there is always a tiny leak in the three way and if I touch the actuating rod at all air dumps out...

timing.

pump · 02-28-2008, 02:43 PM

Quote:

Originally Posted by destro7976

Where would I go to obtain the upgades you're talking about Pump? Just CCM's ebay store? Thanks for the help. I'll keep tinkering...

call thems

EDIT: oh and this is how you mod the ram https://www.mcarterbrown.com/forums/c...-censored.html

Clearush · 02-28-2008, 03:27 PM

Trigger sticking for some reason, pressure on the lpr set to high?

destro7976 · 02-28-2008, 08:42 PM

Thanks for all the advice. Melissa actually PM'ed me on this so I just called CCM and Rod is pretty sure I'm getting blow by in the ram. So they are sending me the parts to upgrade/rebuild my ram, the Orings to rebuild the Three way, and some other orings just to make sure I get things running smoothly. They treated me so well that I feel great about owning a CCM marker. I'm already plotting what product of theirs to purchase next. Truly excellent company that has earned my business.

02-24-2008, 05:29 PM	#1 (permalink)
destro7976 Post Whore Join Date: Dec 2006 Location: Northwest PA	New Series 5 Owner Here w/ a Couple of Questions... I just received a used Series 5 and need some help. First...There is a slight leak in the three way and I was wondering if CCM 3-ways tend to be finicky or if I just need some new orings? Secondly...The back block sticks in the rearward position from time to time causing a leak out of the end of the ram. What might be causing this? When I move the ram by hand it seems smooth...so any help would be great thanks! I just want to get her shooting as good as I've heard she can.

02-24-2008, 06:03 PM	#2 (permalink)
spymongoose 68 Cal Junkie Join Date: Apr 2007 Location: Vegas Baby!	sounds to me that the timing in the three way is off. I would have you verify that that's the case first before you monkey with your timing rod, but I think that explains both your problems... with the 3way shaft timed too early it would leak out or hold the back block rearwards sometimes. __________________ My Feedback The Whiteboard Webcomic - Updated Mon/Wed/Fri

02-27-2008, 04:17 AM	#3 (permalink)
pump Post Whore Join Date: Aug 2006 Location: under Kapiolani on ramp	you can also get the new pistons....there OMG smooth.....speeds up cycling time noticably then you can also add a QEV to the ram....then you just talking crazy talk __________________ Hawaiipb.com Autotriggers For Sale

02-28-2008, 03:27 PM	#7 (permalink)
Clearush Not a Furry Join Date: Mar 2006 Location: Amarillo, Texas	Trigger sticking for some reason, pressure on the lpr set to high? __________________ Black Watch Scenario Paintball Team , MCB Feedback Carter's Commando Texas division

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-28-2008, 12:53 PM	#4 (permalink)
destro7976 Post Whore Join Date: Dec 2006 Location: Northwest PA	Thanks for the suggestions, though the timing doesn't seem too bad. It actually will cycle alright sometimes and then stick open, but there is always a tiny leak in the three way and if I touch the actuating rod at all air dumps out... Where would I go to obtain the upgades you're talking about Pump? Just CCM's ebay store? Thanks for the help. I'll keep tinkering...

02-28-2008, 08:42 PM	#8 (permalink)
destro7976 Post Whore Join Date: Dec 2006 Location: Northwest PA	Thanks for all the advice. Melissa actually PM'ed me on this so I just called CCM and Rod is pretty sure I'm getting blow by in the ram. So they are sending me the parts to upgrade/rebuild my ram, the Orings to rebuild the Three way, and some other orings just to make sure I get things running smoothly. They treated me so well that I feel great about owning a CCM marker. I'm already plotting what product of theirs to purchase next. Truly excellent company that has earned my business.