|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|04-25-2008, 09:13 PM||#1 (permalink)|
SS 25 questions...
Anyone tweak a SS 25? What springs?
Ever try and set it for 12 gr's?
Pump Gun Pimp #80
Spec Ops Pump User#86
Pump Player Clan
|04-25-2008, 10:37 PM||#2 (permalink)|
Red - Black
Sorry - I haven't
400 psi input is what the stock valve and spring combo would need. The passages are relatively small - so you shouldn't need to shim those spaces.
Pumpenstein - NSA National Champions
TF's MCB Trust.
|04-26-2008, 01:12 AM||#3 (permalink)|
Ghost with the most
With my S6 Prototype (which is essentially an SS-25 milled to look like an S6), I replaced the valve spring with a standard Phantom valve spring and boosted the input pressure to around 450 - 500 psi. It's a lot more efficient than stock now. I still don't think it'd be great on a 12 gram however.
|04-29-2008, 01:45 PM||#6 (permalink)|
And just so others reading this know, we consider that an aftermarket change so we will not warranty those parts. *SHOULD* you have gun problems and send us your gun back you will be responsible for purchasing the stock parts again.
(Marc- not directed at you, but I just want other people to know what our standard policy is)
Please let me know if any clearification is needed. Thank you.
|Thread Tools||Search this Thread|