mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   Custom Projects / Custom Questions (https://www.mcarterbrown.com/forums/custom-projects-custom-questions/)
-   -   Double barrel break breach (https://www.mcarterbrown.com/forums/custom-projects-custom-questions/174008-double-barrel-break-breach.html)

Skibbo 09-02-2011 01:42 PM

what about housing the LPR and hoses in the front grip? Just let the hoses be longer and coiled in a cavity, so when you open it the hoses straighten and won't disconnect. That way you can hide everything and have it still look great.

Spider! 09-02-2011 05:01 PM

Quote:

Originally Posted by Skibbo (Post 1988638)
what about housing the LPR and hoses in the front grip? Just let the hoses be longer and coiled in a cavity, so when you open it the hoses straighten and won't disconnect. That way you can hide everything and have it still look great.

I was just comparing the design process. You get involved the mechanics of the operation and find the "easy" stuff like a simple hinge to be a problem.

Rainman229 09-02-2011 07:50 PM

Quote:

Originally Posted by Spider! (Post 1988903)
I was just comparing the design process. You get involved the mechanics of the operation and find the "easy" stuff like a simple hinge to be a problem.

Anybody can make a ghetto hinge set up for it. But making one that breaks like a true shotgun is tricky. Flipping or hinge at the seam will break as the drawing show. Hinged like a shotgun should be will pop the breach above the rear housing to load. And only bring the front down less then 15degs to do so. The other way you need to flip it at least 40degs to load as shown in the drawing.
Less likly to jam a finger in there that way. I have the setup layed out. Little more complex then a basic hinge. But worth it .

punisher068 09-02-2011 08:53 PM

Can I assume you would make this First strike compatible?

Rainman229 09-02-2011 08:56 PM

Any rounds you shove it in it will work. If you have the time to fiddle With witch end goes in first. Then yes :)

ComradeBenedict 09-02-2011 09:02 PM

Do you have an idea of how long the body will be? I'm thinking about what set-up would be best for this.

Rainman229 09-02-2011 10:03 PM

Well total length of it Is about 5.375 inchs. Front breach part being about 2" of it. and the hinge being close to the nose. So you have enough room to mount a cocker frame below it or a ion frame or to mount a kp frame under it.

Ion frame would probably be the easiest as you kill 2 birds with one stone, with it having an asa built in to it.

ComradeBenedict 09-02-2011 10:09 PM

I was thinking more along the lines of a K-frame with a flat mount, for this kind of look:
https://cdn.pimpmyspace.org/media/pms...nunderover.png
Will this be 12gram compatible?

Rainman229 09-02-2011 10:18 PM

k frame is doable But 12ies kind of doubt. Even running in the 150 to 250 psi range your still filling a 2 to 2.5 cubic inch air chamber. Can always cross that bridge when we get their. At the moment it's unsure if it will work and how many shots you could get out of it.

Someone could always test an ion on 12s and divide the shot count in half to see if its worth the attempt. hmm if i only had a working ion

Spider! 09-02-2011 10:20 PM

Quote:

Originally Posted by Rainman229 (Post 1989207)
Any rounds you shove it in it will work. If you have the time to fiddle With witch end goes in first. Then yes :)

I would be tempted to try it, but it would look odd to be sniping with FS rounds from a sawed off shotgun.


All times are GMT -4. The time now is 07:02 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC