- - Double barrel break breach
|Rainman229 ||10-15-2011 06:39 AM |
Haven't messed with it in a few weeks. Need to make a new valve slide things. The new i did make is off in length. I'm making the new one adjustable this time. so i can mess with how far i can open it.
But even with the valve that would work correctly i chroned a reball at over 300 at about 150psi
this is the single barrel version. think the valve chamber is a tad over kill in size lol
|y0da900 ||10-15-2011 10:23 AM |
Overkill in size is a good thing - means you can cram crap in there to suck up volume and bump efficiency.
They are a very efficient valve system - even more so if you can smooth out the air flow with some nice tapers.
|Rainman229 ||02-06-2013 12:31 PM |
Back from the dead
Well what i come to find is the valve assembly slide won't open with out help. no matter what i do i can't get it to open with out help. Only solution i found was adding a spring to push it open. Works great and and seams to be reliable.
only thing i see is in the build of the marker. No where near a easy build. doubt it would even be feasible. Think i'll make something smaller instead
|punisher068 ||02-06-2013 01:14 PM |
Saw a post by superstancy about a double barrel Ion on PBN,made me think of something like this
|Spider! ||02-06-2013 01:29 PM |
This is the sort of application I was thinking about for my mousetrap valve on my pirate. You could make the dump chamber vertical (shorter spool horizontal), with a small spool to charge the dump chamber after the break-open pushes (pulls) the main spool sealed.
Still not a cheap build for a break open though.
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC