|Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!|
| ||Thread Tools||Search this Thread|
|02-09-2013, 12:29 AM||#1 (permalink)|
Heart of Texas
Cut up pump wgp cocker help
Pardon the newbness, I've been playing since 96 or so but just now started looking into machined/cut toys. I found this picture of a 2k+ cocker mini'd and half blocked. What do I have to do to recreate this marker for myself? Is there someone here who builds these? Thank you again.
|02-09-2013, 01:10 AM||#4 (permalink)|
The Panda with a Gun
Sorry for the short reply was eating and got lazy lol
Let me elaborate.
the two I named above will cut the body and provide the parts such as the bolt and sled needed. They will also slot the hammer and shorten the pump arm.
The rest will be up to u to decide. Such as pump or semi and parts.
U CAN do it your self without a mill. I did it. But. It will not look the best. And it will take a very long time
|02-09-2013, 05:43 AM||#5 (permalink)|
That looks like a Jcurt job. I had him halfblock my Trilogy and I'm definitely thinking about going back for more work.
|02-09-2013, 06:43 AM||#6 (permalink)|
Join Date: Dec 2010
That was my pump (sold now to a good home), and it's not a Jcurt job, it's Super Stanchy (apologies if I mispelt your name) who did it.
It is halfblocked, mini'd and midgeted
The halfblock kit is a Jcurt kit.
The pump kit is a Checkit Products mini pump kit - very similar to CCM, but with massive orings.
In it's current state:
EDIT: I don't want to sound condescending, but I think this information may help you - the vertical ASA where the reg goes is part of the mini pump kit. You may already know this, but it took me a lot of trawling around forums until I found the answer I needed...hope your build goes well!
|02-13-2013, 10:41 PM||#8 (permalink)|
The Man With No Plan
halfblocked (cut off the back upper half)
mini'd (cut off the front)
midgeted (shorten the back to be flush to the frame)
you will need to pay with the springing to get it to shoot correctly
that also looks like it has a ccm threaded feedneck in the pressed in feedneck
ego necking might be able to get it even shorter
|02-14-2013, 06:38 PM||#9 (permalink)|
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)
just FYI when you ego mod a body the neck is actually about 0.030 shorter than a standard 04 neck (using a CP ego neck). It looks nicer and works better but if your looking to get the shortest neck possible a cp ego neck might not be THE only way to go. maybe a different manufacturer would be lower but I dont know of any off hand.
My Feedback - https://www.mcarterbrown.com/forums/f...ml#post1575817
A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
|02-14-2013, 09:11 PM||#10 (permalink)|
The Man With No Plan
if you cut the rails off the body, then the egoneck is nice and low!
|Thread Tools||Search this Thread|