mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 02-27-2014, 11:06 AM   #101 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

I made some changes, and realized I messed up the piston housing last night. I need to add about .4000 to the piston housing and removed about .4000 from the can so it will still fit in the gun, but here is essentially what it will look like. If I have time tonight I will finish the piston housing and begin work on the actual piston/spool

I added an o-ring to the end of the bolt so it will slide in the body.




I also made it so the brass piece doesn't just slide into the can as a whole. I cut the can into two pieces and used bearing mount to hold the brass piece into the front piece.




Here it is mocked up in the gun. The stroke is right around 1". Much shorter than the standard 1.8"


Buwaro is offline   Reply With Quote
Old 02-27-2014, 12:56 PM   #102 (permalink)
Classic Collector
 
WholemealDrop's Avatar
 
Join Date: Apr 2012
Location: Minnesnowta

Could use a 90* fitting to a straight fitting and use the front reg mount to run an external reg on it.
__________________
MCB Feedback
WholemealDrop is offline   Reply With Quote
Old 02-27-2014, 02:00 PM   #103 (permalink)
How do I turn this on?
 
moving_target's Avatar
 
Join Date: May 2009
Location: Mainah

well ****. this plus the new tippmann mag system... many thoughts
__________________
My Feedback

Quote:
Originally Posted by Spider! View Post
I'm gonna pop some aggs.
Only got 20 rounds in my pocket.
I'm huntin'
Looking for some cover,
This is ****ing awesome.
moving_target is offline   Reply With Quote
Old 02-27-2014, 09:20 PM   #104 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

Quote:
Originally Posted by WholemealDrop View Post
Could use a 90* fitting to a straight fitting and use the front reg mount to run an external reg on it.
If the pressure to run it is low enough I am going to try using an Axe reg/asa. If it isn't, then I'm thinking about running an external line to the stock reg location. I was trying to keep the stock trigger location.
Buwaro is offline   Reply With Quote
Old 02-27-2014, 09:22 PM   #105 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

Quote:
Originally Posted by moving_target View Post
well ****. this plus the new tippmann mag system... many thoughts
I am thinking rufus dog center feed with a spire on top and eyes.
Buwaro is offline   Reply With Quote
Old 02-27-2014, 09:52 PM   #106 (permalink)
Active Member
 
mahonri85's Avatar
 
Join Date: Jan 2012

Quote:
Originally Posted by Buwaro View Post
I am thinking rufus dog center feed with a spire on top and eyes.
Totally worth it!! And this whole project would be a waste if you didn't do it.
__________________
Regarding My eBolt 98:
Quote:
Originally Posted by danssoslow View Post
That is legitimately bad ***. Not "if Tippy's are your thing" kinda cool; but "you can shove your four figure, anodized, billet wizbang up your ***!, bioch!" kinda cool.
My life is complete
Quote:
Originally Posted by Buwaro View Post
I actually read your entire thread, its what made me really want to do this. ...your build is what made me say hell yes, I'm doing this.
mahonri85 is offline   Reply With Quote
Old 02-27-2014, 10:18 PM   #107 (permalink)
Not Legit
 
magmoormaster's Avatar
 
Join Date: Jun 2009
Location: Orem, UT

That's subjective. I want to do a mech build.
__________________
Feedback

Quote:
Originally Posted by Chad Thompson View Post
Who is this Chad Thompson you all are talking about?
Quote:
Originally Posted by Jack Wood View Post
ooh look at that over there!!! Jeremy Salm riding a giant rainbow-coloured unicorn!!
Virtus Et Peritia
magmoormaster is offline   Reply With Quote
Old 02-28-2014, 12:16 AM   #108 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

Quote:
Originally Posted by mahonri85 View Post
Totally worth it!! And this whole project would be a waste if you didn't do it.
I was also contemplating my own custom feed using an aftermarket Axe clamping feedneck, but then I would need the tap and I don't even know what size that is.
Buwaro is offline   Reply With Quote
Old 02-28-2014, 12:17 AM   #109 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

Quote:
Originally Posted by magmoormaster View Post
That's subjective. I want to do a mech build.
I was actually thinking about doing something like that. I have a really nice pneumatic roller switch that would be perfect, but I would have to use spring return.
Buwaro is offline   Reply With Quote
Old 02-28-2014, 04:03 PM   #110 (permalink)
Not Legit
 
magmoormaster's Avatar
 
Join Date: Jun 2009
Location: Orem, UT

What switch are you using? That was like my only concern; I figured I would have to use a cocker 3-way and would have to really Gerry rig it.
__________________
Feedback

Quote:
Originally Posted by Chad Thompson View Post
Who is this Chad Thompson you all are talking about?
Quote:
Originally Posted by Jack Wood View Post
ooh look at that over there!!! Jeremy Salm riding a giant rainbow-coloured unicorn!!
Virtus Et Peritia
magmoormaster is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 11:18 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC