|Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!|
| ||Thread Tools||Search this Thread|
|06-07-2019, 03:27 PM||#1 (permalink)|
Join Date: Feb 2007
Using Empire Mini Asa for gas through grip design
Has anyone ever used an Empire Mini Asa for a gas through grip design? Is it difficult to connect a fitting to the mini asa and is it difficult to mount the asa to the grip?
|06-08-2019, 08:30 AM||#2 (permalink)|
Join Date: May 2012
Location: Vancouver, Washington
^^^ If you are new to the sport and need help finding gear, click here!!!^^^
|06-08-2019, 10:49 AM||#3 (permalink)|
Join Date: Mar 2011
Someone here did that with an ion.
To get it to seal to the frame, you'd just need a hole in the correct spot and a dovetail milled in the frame. On the inside of the frame, you could drill/tap it to 1/8npt to accept a macro fitting.
|06-08-2019, 01:22 PM||#4 (permalink)|
Join Date: Mar 2009
Location: Santa Cruz Mountains
Ive done a few Ion conversions with Relays
The best,easiest way is to use the TM7 bracket adapter so you dont need to use the air transfer tube.
You can use any 1/8 npt threaded fitting on the adapter
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
Last edited by punisher068; 06-08-2019 at 01:27 PM.
|Thread Tools||Search this Thread|