mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 03-18-2020, 01:16 PM   #11 (permalink)
Tinkerer
 
Macdave06's Avatar
 
Join Date: Mar 2011
Location: Vacaville, CA

Quote:
Originally Posted by Trbo323 View Post
How comfortable is that?

Have you thought about taking off the feedneck and working the hole into a D so this can be a single shot first strike pump?
It's pretty comfy. I could have made the handle a sit a little further forward, but overall it's not bad. Just a little long on the finger.

On the feed I was thinking about lopping off the power feed and adapting a stock class feed. Although it's not bad with a stick feed coming back off of the stock neck.
Macdave06 is offline   Reply With Quote
Old 03-18-2020, 01:19 PM   #12 (permalink)
Tinkerer
 
Macdave06's Avatar
 
Join Date: Mar 2011
Location: Vacaville, CA

Quote:
Originally Posted by Knuckle Dragger View Post
I love it. Canít wait to see it finished!
Thanks. I added a knuckle guard for something to mount an ASA to. I need to cut the front end a little shorter to match the shape of the stock though. I'll add a pic up when I get home tonight.
Macdave06 is offline   Reply With Quote
Old 03-18-2020, 08:20 PM   #13 (permalink)
Tinkerer
 
Macdave06's Avatar
 
Join Date: Mar 2011
Location: Vacaville, CA

You can kind of see here what I was referring to with the knuckle guard. It just needs to be a little closer to the grip in front. I think I may just pick up some brass flat stock and do it out of brass instead.20200318_171234.jpg
Macdave06 is offline   Reply With Quote
Old 03-18-2020, 08:42 PM   #14 (permalink)
Born again n00b
 
Knuckle Dragger's Avatar
 
Join Date: Jan 2020

Would you be able to integrate a 12g cartridge system into the stock? Either way, the bends and your placement is clean. I’m slowly working on a spump myself. I’m currently trying to fight a binding issue between the bolt and my homemade Delrin sled while using a Trilogy pump kit as well since it’s a clean looking option.
Knuckle Dragger is offline   Reply With Quote
Old 03-18-2020, 09:08 PM   #15 (permalink)
Tinkerer
 
Macdave06's Avatar
 
Join Date: Mar 2011
Location: Vacaville, CA

I thought about drilling into the handle and sliding the 12g changer in it but I couldn't think of a good way to get the air out. I'm thinking I might move the ASA forward and use a dropout changer so it can be tucked in tighter.

Last edited by Macdave06; 03-18-2020 at 09:14 PM.
Macdave06 is offline   Reply With Quote
Old 03-24-2020, 07:15 AM   #16 (permalink)
MCB Member
 
autococker04's Avatar
 
Join Date: Aug 2007
Location: Pittsburgh

Do you think that you could plug the old vert ASA hole, drill a new one on the side of the body in front of the valve, and use an all male threaded tube to go straight from the ASA into the body? Then you could run a dropout changer parallel to the body and have no hoses.


Really cool looking project.
__________________
Feedback!
autococker04 is offline   Reply With Quote
Old 03-24-2020, 09:29 PM   #17 (permalink)
Tinkerer
 
Macdave06's Avatar
 
Join Date: Mar 2011
Location: Vacaville, CA

That could work. My only worry would be getting a grip on the knob of the changer with it so close to the body.

There is no ASA hole BTW, that would be on the front block which is replaced with a cap. Wanted to get the whole game plan figured out before I decide which side of the body to tap.

Last edited by Macdave06; 03-25-2020 at 02:16 AM.
Macdave06 is offline   Reply With Quote
Old 03-24-2020, 10:44 PM   #18 (permalink)
Super Legit
 
Trbo323's Avatar
 
Join Date: May 2012
Location: Vancouver, Washington

Or.....way cooler

Run it back bottle like you had it but run a agd 6 pak or a micro ca ii in that stock. It would take a lot of cutting but would be so crazy cool
__________________
https://www.mcarterbrown.com/forums/n...ml#post2612544

^^^ If you are new to the sport and need help finding gear, click here!!!^^^


feedback: https://www.mcarterbrown.com/forums/f...-feedback.html
Trbo323 is offline   Reply With Quote
Old 03-30-2020, 01:44 AM   #19 (permalink)
Tinkerer
 
Macdave06's Avatar
 
Join Date: Mar 2011
Location: Vacaville, CA

Yeah I dunno if I wanna chop into the stock. Wood is definitely not my area of expertise.
Macdave06 is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 09:56 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC