|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|06-25-2012, 02:39 PM||#1 (permalink)|
Home of the lama
WALZ/MAR Grease gun build for Rover (Completed)(Round 2 Completed Again)
Mar sent me a pirate stock, a pmi body and a crossman
trigger group and told me make it "right for my partner".
Here's what I have done to her
Added a new muzzle end to her
cut a quick strip notch
Modified the crossman trigger group and made a RVA
Replaced the top tube with one somewhat longer
and made it springfed
Made a springloaded thadaptor for faster reloading
Made a removable grease shroud for the top tube
Added a front site and a rear site
Poweredcoated all in black texture
Made a brass bolt end cover, brass pump arm and brass
cover plate for end where cutout is exposed when using crossman trigger groups,
Polished all brass accents
Added a mega beefy wood grease handle for a secure grab.
Still need to modify the valve and test.
Almost there with this one...
Last edited by WALZ; 03-19-2013 at 10:48 AM.
|06-25-2012, 02:42 PM||#2 (permalink)|
Major Power Factor
Join Date: Dec 2010
Location: The Front Range, CO
Very cool, Wally. I love the top-slotted springfeed/Thadapter - very clever, as it lets you see how many rounds you still have at a glance.
|06-25-2012, 04:01 PM||#3 (permalink)|
Join Date: Aug 2006
Very nicely put together
I didn't know you could powder coat soldered tubes <?>
|06-25-2012, 04:06 PM||#4 (permalink)|
Not Banned Kerry
Join Date: Oct 2010
Location: Ottawa, Canada
|06-25-2012, 04:11 PM||#5 (permalink)|
Money Spending Enthusiast
Join Date: Jun 2009
SMEXY! Wish I had dolla' bills to get my own!
|06-25-2012, 04:31 PM||#6 (permalink)|
Home of the lama
On the body of this one I cured at 350* for double the standard time.
The add-ons I cured at the standard 400* for 15 minutes after flow out.
Talked to a few shops and this is how they do it.
Works out well, seems just as tough.
|06-25-2012, 05:16 PM||#9 (permalink)|
Join Date: Jan 2009
Location: Toronto, Ontario, Canada.. EH
Would you ever think about selling pre-modified crossman trigger groups for others to tinker with putting their brass in stocks?
And as any of your work is, stunning, just stunning.
https://www.mcarterbrown.com/forums/f...back-come.html -- My Feedback
|Thread Tools||Search this Thread|