|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|11-08-2017, 08:51 PM||#1 (permalink)|
Cheap a$$ gunslinger
Join Date: Jul 2010
Location: Lexington, SC
Trracer under the barrel pump kit
Has any one tried making one, maybe 3d print one and use a phantom guide and mount, maybe fabricate an arm that would attatch a phantom kit to the trracers bolt, i want to try a micro setup but the pump handle makes it where you cant use short barrels and i doubt id be able to trade it for a phantom even with all the work and nice parts iv put into it
Even enemies can show respect
STOCK CLASS-the Jedi way of paintball
|11-08-2017, 09:20 PM||#2 (permalink)|
work on points for style
Never seen one on a Trracer but I have seen one on a Tagmaster. That's a whole different connection type to the bolt compared to a Trracer though.
You'll have to have a pump arm made like an SP Boss', or possibly have a handle 3d printed. Have the top part go around the barrel using it as the support and guide, and have the fatter part below used as the actual handle. Similar to the pump handle accessory for phantoms. To me, that'd be the easiest way to go about it.
If it were me I'd just go and get a Phantom. Way more barrel options, way more custom parts out there for them. I like my Trrcaer and Tagmaster but nowhere near as much as my Phantoms.
"There isn't much that I feel I need, a solid soul and the blood I bleed."
|Thread Tools||Search this Thread|