|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|12-23-2018, 12:44 PM||#11 (permalink)|
Join Date: Feb 2009
Fill with epoxy mixed with brass dust. Don't burn it. Me, personally, I would mix up some Alumilite and mica powder, probably an ocean blue or brass mix, to fill the holes.
Also, I can't find any burl near me that isn't an arm and a leg. Where do you get yours?
|12-23-2018, 05:04 PM||#12 (permalink)|
Join Date: Sep 2009
Location: Southern California
|12-24-2018, 10:25 AM||#14 (permalink)|
Join Date: Aug 2006
SUBSEQUENTLY I found nice burl on Ebay, for a reasonable amount. $50 for a nice piece, big enough for a nice pirate. Maple burl. Walnut burl = $1,000,000.00 per BF.
I'll throw up a pic. the pic is a lie. the stock doesn't survive up close scrutiny, and the gloss effect is gone. The burl has soaked up 8 coats of hand rubbed poly, like it was nothing. 8. coats.
|Thread Tools||Search this Thread|