mcarterbrown.com

mcarterbrown.com (https://www.mcarterbrown.com/forums/)
-   The Dead Zone (https://www.mcarterbrown.com/forums/dead-zone/)
-   -   What is the Best winter marker ever made? (https://www.mcarterbrown.com/forums/dead-zone/92640-what-best-winter-marker-ever-made.html)

Jlandon 09-18-2009 10:03 PM

What is the Best winter marker ever made?
 
Ok whats the best winter marker made or was ever made?

HyePower 09-18-2009 10:17 PM

Anything that uses liquid CO2.

Kahnif 09-18-2009 10:24 PM

Tippmann C3 kept your hands warm :) kidding. But I hate markers with metal regs or grips that get really cold. I've never had anything not work well in the cold so I wouldn't worry about it.

DSA 09-18-2009 10:34 PM

IconZ1

i8pie2day 09-18-2009 10:38 PM

lol at the c3 comment...

as for on topic... we dont have winters... so i wouldnt know...

incynr8 09-18-2009 10:52 PM

Vectors would damn well, regged, in winter.
lowest I used one was 11F.

BigOldSkool 09-18-2009 11:32 PM

Anything that came out form Montneel.

Ive had those shooting great with Co2 in the snow at like 20 degrees.

Hobbes 09-18-2009 11:33 PM

Tippmann Pro-Lite is my pick.

slowerpig81 09-18-2009 11:47 PM

If you're using HPA or nitrogen as a propellant, the issue is more with how lubricants and dynamic parts interact with the cold. For example, some lubricants may gum up or thicken causing parts to stick, this is especially important on spool valves. If there are very small tolerances in parts, expansion or contraction of metal parts may effect how they perform. Also, a marker that has a lower firing pressure and softer cycling may be nicer on brittle paint.

I doubt a C3 would work very well for a couple reasons:
propane pressure is negatively affected by the cold
air densities would change, which might result in needing to tune the fuel/air mix to get proper combustion
cold battery may not provide sufficient voltage to operate spark plug.

Pump markers pretty much always work in cold weather. I'd say for cold weather, a nelson valved pump such as a Phantom running on HPA would be extremely reliable. However, Nelsons are not designed to run on liquid CO2, and are difficult to adapt because of set air chamber dimensions. A sheridan based system would be better at using liquid CO2.

Born4Evil 09-18-2009 11:47 PM

I'm with Hobbes, I own 3 pro lites. They LOVE liquid co2, and thrive in the NE fall/winter months.


All times are GMT -4. The time now is 02:12 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC