Noxx Feed System Separate parts available now
My new feed system is now available for preorder!!!:D:D:D
I have worked out all the bugs with it that I have found and from the few suggestions for improvement that I received. This system is now available separately.
Here is the system:
8-round springfeed tubes. Takes the hassle out of reloading a springfeed. The tube IS the springfeed so they basically act as a magazine.
You can choose between clear or smoke tubes.
The feedblock will be made to fit your marker and will require no permanent changes to your marker. These will fit the Phantom feeds, superstocker feeds, and any other feed that you can jam a 10-rnd tube into.
Here are some pics mounted on my Typhoon and of what the tubes look like in a capless harness:
x1 = $5
x5 = $20
x10 = $35
x20 = $65
x25 or more = $3 each
Smoke tubes will add $5 to the total. Shipping will depend on the amount you order.
Once you have ordered more than 25 tubes (I keep track of all orders), tubes will be $3 each regardless of how many you order at a time.
Springs can also be sold separately as well.
10" and less = $8
After 10" add $0.50 per inch
Questions or comments, post here or PM me. Thanks!!!
Noxx that is just to cool and creative man. Nice job bro.:D I really think it's cool.:D
can you use caps on these if you dont have capless harness?
can we see pics of the feedblock?
This would be cool for a project of mine in the near future... Can you make them from brass tubes?
Are they the same length as 10 rd tubes?
Oldschooldave - Yes, you can use caps on these and that is what I use. The capless harness is just to show you what they look like in a harness.
optical 2 - the feedblock will depend on the marker you are using this system on. The adapter I made for my Typhoon fits on the Qbow adapter.
Pizzaluvr - They are the same length as 10 round tubes and I guess I could do them from brass but they would be a bit higher in price.
your feeds would be perfect with this adaptor of mine that was put together by PPS, check it out,
it's real easy, 1 plumbimg elbow, and the smaller port is lined with a green cap, then just cut away the uh.. lid section.
But you could use my tubes w/ a 90 degree adapter and lower the profile. My feed defies gravity a little bit.
This is a great idea. It's about time someone did something with the tubes. You just had to show these didn't you. I guess I'll have to fill my Black Cell vest with these. Dammit NOXX I'm a dead man you know that right!!!! Just when I thought it was safe to build a phantom along comes these.
|All times are GMT -4. The time now is 03:57 PM.|
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC