Originally Posted by apoc4lypse
This. Though chances are you will need to tap the threads deeper on the valve body and/or ASA to get it flush with the lever changer with minimal gap.
Side note, I'd love it if you ever came up with a dualpheed mount that had a little offset pocket that would cup the end of the leverchanger to help secure it. Seems like no matter how much loc-tite I put on the nipple threads, or how well I clean it before loc-titing it, I can't get it to lock in place solid enough that if I bump it in play it won't rotate just a little bit and come out of parallel with the body. Never major, or to the point of leaking, but just enough to set off my OCD
Side-side note: Any interest in working with me on a BT SA-17 Pheed? Just grabbed one for cheap that I could send you for R+D.