mcarterbrown.com  

Dealers Forum Paintball Dealer? Having a Special? Let us know here.

Reply
 
Thread Tools Search this Thread
Old 01-23-2020, 07:27 PM   #31 (permalink)
Power Lurker
 
hellion360's Avatar
 
Join Date: Aug 2006
Location: 518

CCM Fan
PPS Fan
CCI Phantom Fan
marked all the paid folks with a $
__________________
~~Need Inception Designs Products? Send me a message~~

MCB Feedback
Old PBN Feedback
hellion360 is offline   Reply With Quote
Old 01-25-2020, 11:43 AM   #32 (permalink)
Power Lurker
 
hellion360's Avatar
 
Join Date: Aug 2006
Location: 518

CCM Fan
PPS Fan
CCI Phantom Fan
Everyone that has paid has been shipped.
Their tracking numbers have been posted next to their names.

Still waiting on payment from Cale and need an address from BassNinja.
__________________
~~Need Inception Designs Products? Send me a message~~

MCB Feedback
Old PBN Feedback
hellion360 is offline   Reply With Quote
Old 01-26-2020, 02:04 AM   #33 (permalink)
here 4 the memes
 
Salmon's Avatar
 
Join Date: Jan 2012
Location: Rochester, NY

I'll take one of the black
__________________
Salmon's Feedback
Salmon is offline   Reply With Quote
Old 01-26-2020, 11:09 AM   #34 (permalink)
Power Lurker
 
hellion360's Avatar
 
Join Date: Aug 2006
Location: 518

CCM Fan
PPS Fan
CCI Phantom Fan
Everyone is all shipped out.
I still have triggers in stock for anyone looking for them.
__________________
~~Need Inception Designs Products? Send me a message~~

MCB Feedback
Old PBN Feedback
hellion360 is offline   Reply With Quote
Old Yesterday, 06:13 PM   #35 (permalink)
Goddamn Loch Ness Monster
 
William the Third's Avatar
 
Join Date: Jan 2015
Location: WNC

PPS Fan
CCI Phantom Fan
Can confirm that it works with Gen 1 twist safeties.

I kind of wish it came with small shims to both center the trigger, and prevent it from rubbing against the side of the frame. That said it's a pretty easy issue to solve even without shims. Drive the pin in a bit further than needed, then drive it back out just a hair. This will center the trigger and prevent it from rubbing on the frame. It should stay in place, even without shims, due to the interference fit between the pin and the inner race of the bearing. That is, as long as the pin doesn't move in the frame.
William the Third is offline   Reply With Quote
Old Yesterday, 08:28 PM   #36 (permalink)
Power Lurker
 
hellion360's Avatar
 
Join Date: Aug 2006
Location: 518

CCM Fan
PPS Fan
CCI Phantom Fan
Quote:
Originally Posted by William the Third View Post
Can confirm that it works with Gen 1 twist safeties.

I kind of wish it came with small shims to both center the trigger, and prevent it from rubbing against the side of the frame. That said it's a pretty easy issue to solve even without shims. Drive the pin in a bit further than needed, then drive it back out just a hair. This will center the trigger and prevent it from rubbing on the frame. It should stay in place, even without shims, due to the interference fit between the pin and the inner race of the bearing. That is, as long as the pin doesn't move in the frame.
You can also use a small probe or precision screwdriver to move it over a little.
The good fit of the pin should allow the trigger to maintain it's place.
__________________
~~Need Inception Designs Products? Send me a message~~

MCB Feedback
Old PBN Feedback
hellion360 is offline   Reply With Quote
Reply

  mcarterbrown.com » Buy, Sell, Trade » Dealers Forum

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:54 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC