mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 12-04-2018, 12:22 AM   #1 (permalink)
Rec Poster
 
Join Date: Sep 2015

DSG Feed Tube for later Generation

I have a first gen SN007 DSG that I am looking to modify for the side-loading of the feed tube. How exactly does it work to keep the balls from coming out the hole? I saw this video where the breach is opened and then blocked when the ball chaser is locked in place and then closed when it is engaged. Is it twisting the inner tube when you lock down the chaser and then twists back when it's engaged?

Saw it in this video here:

https://www.youtube.com/watch?v=5bZQq_0ytwc

Any help would be much appreciated. Thank you!
bchu is offline   Reply With Quote
Old 12-04-2018, 12:34 AM   #2 (permalink)
Rec Poster
 
Join Date: Sep 2015

Or any extra second/third gen feed tubes would also be nice!
bchu is offline   Reply With Quote
Old 12-04-2018, 01:57 PM   #3 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by bchu View Post
I have a first gen SN007 DSG that I am looking to modify for the side-loading of the feed tube. How exactly does it work to keep the balls from coming out the hole? I saw this video where the breach is opened and then blocked when the ball chaser is locked in place and then closed when it is engaged. Is it twisting the inner tube when you lock down the chaser and then twists back when it's engaged?

Saw it in this video here:

https://www.youtube.com/watch?v=5bZQq_0ytwc

Any help would be much appreciated. Thank you!
yeah the inner tube rotates and blocks the hole in the firing position. it can only rotate when the follower is retracted. twisting it back to the pushing position will allow the follower to push the ball stack again after loading
dukie is offline   Reply With Quote
Old 12-04-2018, 02:01 PM   #4 (permalink)
Rec Poster
 
Join Date: Sep 2015

Quote:
Originally Posted by dukie View Post
yeah the inner tube rotates and blocks the hole in the firing position. it can only rotate when the follower is retracted. twisting it back to the pushing position will allow the follower to push the ball stack again after loading
Thanks Dukie! There only a single line for the inner tube for the follower? The holes between the inner and outer are offset by the length of the locking slot for the chaser?
bchu is offline   Reply With Quote
Old 12-05-2018, 08:42 AM   #5 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
both tubes are slotted and yes the holes between the inner and outer tubes for feeding are offset by the length of the locking slot.
dukie is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Dukie

« Drv valve | - »
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:06 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC