| ||Thread Tools||Search this Thread|
|03-21-2019, 09:00 PM||#1 (permalink)|
Join Date: Nov 2011
Location: Hatfield, PA
Who works on these?
I want to get this up and running. Does someone rebuild these? Or can I where can I get an o-ring rebuild set?
Ego 11, 98c w/ rt & flatline, open class Phantom.
Scenario game player since Wayne Dollack's Operation Barbarossa @ Skirmish in 2001.I have read all 1859 posts in the Nelson Valve Evolution (Project Leprechaun) thread for no apparent reason.
Last edited by Prologix; 03-21-2019 at 09:52 PM.
|03-21-2019, 11:53 PM||#2 (permalink)|
One Foot Less
Join Date: Dec 2007
DM3 should be fairly easy, in that all the orings were round. Some of the Gen E and Diablo stuff used a "quad" ring that is damned near impossible to find now.
I would suggest swapping the main reg out as you may have some issues finding a rebuild kit for that, but otherwise everything should be mostly mainstream.
There are TONS of good articles out on rebuild and tuning of DM3. Watch a video, read a thread, and be ready to walk to the air box a lot. (eat Wheaties too)
|03-22-2019, 12:15 AM||#3 (permalink)|
Join Date: Mar 2011
Location: Vacaville, CA
Not sure if this link will work. Its a PDF of the manual.
Matrix PDF Manual
Easy to mix up the direction of some parts. Check eBay for o-ring kits.
Cockers and Mag
Dragun t1, Project salvo, cheap blowbacks
MQ2 valve, T-board
3d Printed Mag Y-Frame
Last edited by Macdave06; 03-22-2019 at 12:19 AM.
|03-25-2019, 03:25 PM||#4 (permalink)|
they are easy to find if you know where to look
|Thread Tools||Search this Thread|