|Electronic and Mechanical Found a steal of a deal? Share the wealth! Link them here|
| ||Thread Tools||Search this Thread|
|12-08-2018, 07:19 PM||#1 (permalink)|
Join Date: Dec 2017
Location: Ontario, Canada
Cool Mokal ultipro
Are these rebuildable , or would they have non existent proprietary seals?
Marker Collection: 1996 RF mini cocker, 2002 RF autococker, bonzai splash RF minimag, 68-Automag classic, ICD thundercat, tippmann pro-carbine, tippmann flatline a5 , tippmann pro-am, tippmann 68-special, azodin kaos-d , smart parts 4x4 sport (project), tfgpb mech sp-1 (project)
|12-08-2018, 10:12 PM||#3 (permalink)|
Join Date: Jan 2007
Location: Canada, N.S.
I think these this may be rebuildable. I assume some of the internals for the same as a mokal Mirage. I had several Mirage guns years ago. I tore them all apart and replaced the O-rings. This was a big mistake as they used Specialty o-rings. The Replacements continually blew out using CO2.
However now I run two or three mirages using HPA what's no issues. So perhaps the problem was one of using CO2.
I ran this Mag-fed mirage mod all last season without issues. it was my go to gun.
Shaken......but not stirred. Licenced to paint.
Last edited by bond commander bond; 12-08-2018 at 10:16 PM.
|12-09-2018, 02:02 PM||#5 (permalink)|
Join Date: Feb 2007
I bought one new when they were first released. It worked amazing for a few weeks, then just kept blowing o-rings. Yes, all we had back then was CO2. I think it was about 1993 or so. I loved it, accurate even with the short barrel. Internals were vaguely laid out like the Tippy 68 Special. I called the manufacturer about my problems, as I was a field owner at the time and was thinking of converting my rental fleet to these. They sent me a bag of Orings. I ended up going with the F1 Illistrators instead.
|Thread Tools||Search this Thread|