-   Empire (
-   -   My Trracer (

danssoslow 03-27-2012 05:01 PM

My Trracer
-J&J Edge barrel backs with 16" Commando front, Apex2 tip (apex not yet mounted)
-T2W brackets hanging eBay skeleton stock
-Rip Clip
-Magpul AFG (modded pump for better fit)
-GoPro Hero camera on home made mount
-Knock-off Aimpoint rds
-Stainless bolt (thanks Lizard_13 and r-lad!)

Business side.

Here's the Gopro mount I made. I cut down a "tactical" flashlight I purchased from Lowe's, bolted the stem from the Gopro's suction cup mount to the battery cap on the flashlight, and inserted the rig into an offset scope mount.

The camera sits in front of the Rip Clip, so it does not hinder the view.

I still have to run the remote line. I have a CP drop and on/off coming, and will run a 13/3000 below the stock.

Youngpump 03-27-2012 09:29 PM

Looks good all I would do is change the ripclip to a 10rd tube and get a 12 gram changerbut practicality wise the rip clip and hpa is probably better. I love that stock.

danssoslow 03-27-2012 09:33 PM

Funny you say that. Atm, I put the 10rd'er on and have a bucket to put on there. I'll probably still have to run a drop, as the bucket would hit the block where the stock tubes meet the T2W pieces. I'm curious to see if a 15* asa adapter would make it run straight back.

danssoslow 03-28-2012 03:59 PM

I tried putting the bucket on, and it fits; but it is in the way of my mask. I'll have the drop soon to run a 13/3k; I'll just throw the bucket on there.

Youngpump 03-31-2012 04:05 PM

Now that looks a sweet woodsball/ milsim pump. And If you do the drop id just run a 13/3k

wetfootwilley 04-02-2012 09:02 AM

Sweet Trracer! My son Connor was drooling when he saw it this morning. The pictures kind of dark but here he is rocking the pump at a field filled with semi's.

danssoslow 04-03-2012 10:50 PM


Are you familiar with those 'when you see it, you'll crap bricks" photos? So I'm moving my head around, close to the screen (this screen is poo-poo discerning dark things together), checking out details in the gun as best I could; when I noticed a pair of eyes staring back at me.

Goofy, I know; but I was mind freaked there for a moment.

Are there more pics in the Traccer pic thread? I'd like to check it out further.

On a different front, I received one of alpha434's Inception barrels yesterday. I have had this SS J&J autococker barrel here at the house for a while. Together, in the Traccer, it looks pretty impressive. A little on the heavy side; but I have to check this out. That barrel is pretty darn nice shooting on its own; with the ability to barrel match behind it, this should be cake and ice cream. Plus, the Inception is the perfect bore; and with the thinner "nub" on the J&J (same diameter as the Inception), it damn near reached the end of the pump handle (probably a 1/4-3/8" short of flush). it's as stable and as smooth as the stock barrel. I'll post a pic up here in a second.


danssoslow 04-03-2012 11:00 PM

6.6lbs. Still portly; but I'm figuring on using it as a rear pick-off weapon with FS rounds. I always have the Minis for the light and tight.

Youngpump 04-08-2012 05:27 PM


CrazyRuskii 04-13-2012 09:42 AM

Huh. The Rip Clip must mean auto trigger heavan, lol. Nice Trracer man!

All times are GMT -4. The time now is 02:59 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC